The MOD-848 8x8 Modular Matrix provides an all-in-one professional solution to route up to 8 DVI or DisplayPort sources to any 8 DVI outputs, supporting resolutions up to 1920 x 1200. The modular design of this 8x8 matrix provides the ultimate in flexibility by allowing the combination of different input and output cards and the extension of inputs and outputs over CAT5-ELR or fiber. The front-panel LCD displays the current routing status. Each source is accessible to any display by using the front-panel push buttons, the RS-232 interface, or through IP Control (with built-in web server, Telnet, and UDP). Hot-swappable dual redundant power supplies allow these matrixes to be used in demanding 24/7 applications where enhanced reliability, ease of servicing, and zero down-time are required.
Connect up to 8 DVI or DisplayPort sources to the inputs on the MOD-848 8x8 Modular Matrix. DVI sources can be connected directly, or using CAT-5 or fiber, depending on input card used. Connect up to 8 displays via DVI, CAT-5, or Fiber Optic cables depending on which output card is utilized. Connect an Ethernet cable from the network to the RJ-45 connector to use the built-in web server, Telnet, or UDP capability to control routing, EDID, and other functions. Connect an RS-232 cable from a RS-232 control device to control the matrix via RS-232. Connect the included AC power cords to the matrix and plug them into available electrical outlets. All sources will be routed as selected.