Teradek BOND Pro Anton Bauer Mount Integrated HDSDI Cellular Bonding Solution

Condition: Used
  • Now £3,615.00
  • (£4,338.00 inc. VAT)
  • RRP £3,940.00
Item in Stock | Usually dispatched within 24 hours

Bond Pro is an integrated camera-back HD H.264 bonded cellular solution designed specifically for broadcast cameras with Anton Bauer Mount power systems. 

Bond Pro's modular design and ease of use make it a simple addition to any broadcast rig. Its light weight and low power consumption allows cameramen to quickly manoeuvre within tight spaces and broadcast live for long periods of time without interruption or fatigue. 

Like all of Teradek's encoders and bonding solutions, Bond Pro utilizes Sputnik 2.0, which gives news stations IFB communication and real-time broadcast status monitoring. 

The device comes with an HD-SDI input, HD-SDI loop and a full SD card slot for on-board proxy recording. This new design also provides support for up to 6 simultaneous cellular network connections via USB dongles. 

Additionally, Bond Pro offers the same updated modem mounting option as Bond II, which ensures your cellular dongles are protected from aggressive handling. 

When the situation calls for nimble movement and extended broadcasts, Bond Pro delivers the most empowering bonding solution for ENG professionals.

  • Six USB slots for 3G/4G/LTE modems, BGAN, Ethernet, WiFi
  • Modem mounting system
  • 250 Kbps to 10 Mbps
  • HD-SDI, SD-SDI: BNC input
  • Li-Ion battery
  • Supports all standard resolutions and frame rates up to 1080p30.
  • Anton Bauer Mount
  • IFB support
Video InputsHD-SDI, SD-SDI:BNC
Looping Video OutputHD-SDI, SD-SDI:BNC
Supported Resolutions1080i 50/59.94/60
 1080p 23.98/24/25/30
 1080PsF 23.98/24/25
 720p 50/59.94/60
 576i, 480i
Video CodecCompression Algorithm: Baseline, Main and High Profile H.264
 Bit Rate: 250 kbps to 10 Mbps
 Built in Video Scaler and Deinterlacer
Video Streaming SupportMPEG-TS** (Point to Point TCP or UDP, UDP Unicast, UDP Multicast)
 RTMP (Adobe Flash Streaming)
AudioAudio Compression: AAC-LC, MPEG Layer 2
 Embedded Audio Input
 Analog Line or Mic in, adjustable gain
 Headphone output, adjustable volume
Dimensions4.2" W x 1.6" D x 5.9" H
InterfacesFeature-rich WebUI for configuration and control
 OLED LCD Display with joystick Navigation buttons
 On/Off and Reset Switch
 Full size SD
 Six Powered USB 2.0 host ports
NetworkEthernet: 10/100BASE-T
 WiFi: Dual Band 802.11 a/b/g/n MiMO
 Bonded USB Modem support
PowerAnton Bauer Mount
 Internal Rechargeable Lithium Ion Battery (For battery swap purposes)
 Nominal Power Consumption: 5W + 2.5W (max) per USB device
 Nominal Power Consumption while Charging: up to 6W + 2.5W (max) per USB device
Power Input6-28V DC
Be the first to review Teradek BOND Pro Anton Bauer Mount Integrated HDSDI Cellular Bonding Solution. Write a review