Teradek BOLT Pro 2000 HD-SDI / HDMI Wireless Video TX / RX Deluxe Kit with V Mount

Product Code: TER-BOLT-990-1V
Condition: New
  • Now £7,560.00
  • (£9,072.00 inc. VAT)
  • RRP £8,325.00
Item in Stock | Usually dispatched within 24 hours
Loading...

New Bolt Pro Transmitters
Teradek is releasing 3 new transmitters and 3 new receivers for the popular Bolt family of zero daly wirelss video transmittion products. Like previous models, the new Bolt Pro systems offer the same great uncompressed, zereo delay 10bit 4:2:2 video transmittion over the unlicensed 5GHz band. The new models now offer improved features such as manual frequency selection, USB 3.0 GRAB Engine and dual input / outputs.

Bolt Pro 2000 TX
The Bolt Pro 2000 increases the range all the way up to 2000ft line of sight and includes both HDMI and 3G-SDi inputs so it can function on any modern camera rig. Like the 600 model, Bolt Pro 2000 can also be augmented with high gain antennas for increased range and resiliency. The Bolt Pro 2000 is a zero delay wireless video transmission system designed for the most demanding cinema, broadcast, and UAV applications. At less than 1ms latency, Bolt Pro 2000 can transmit 1080p60 4:2:2 video at up to 2000ft line of sight over the unlicensed 5GHz band. 

Multicast Capable
With an upcoming free firmware upgrade, all Bolt Pro 2000s will be multicast capable up to 4 receivers. Despite the number of additional receivers you add to your workflow, Bolt's video quality and latency will remain identical to a unicast system.

Designed for Professionals
The Bolt Pro 2000 offers 3G-SDI video connections and multiple RP-SMA connectors for external antennas. Each unit is housed in a rugged aluminum chassis with multiple threaded and unthreaded 1/4" mounting holes. To power both units, Bolt Pro 2000 ships with a Lemo to PTap cable and your choice of V- or AB-mount plates for the receiver.

WHAT'S IN THE KIT:

  • Bolt 2000 Deluxe Kit - V-Mount
  • 1 x BOLT 2000 TX
  • 1 x BOLT 2000 RX with V-Mount - Mounting Bracket
  • 1 x Antenna Array
  • 1 x Protective Case
  • 1 x Video & Power Cables

 

  • Increases the range all the way up to to 2000ft line of sight
  • Includes both HDMI and 3G-SDI inputs so it can function on any modern camera rig
  • Can also be augmented with high gain antennas for increased range and resiliency
  • Also available as HDMI or HD-SDI Sets

 

 

 

FIRMWARE UPGRADES

 

Firmware v1.1.0

 

IMPORTANT NOTES

 

  • You will NOT be able to downgrade Bolt Pro 300, 600, or 2000 firmware after performing this update. Please read the release notes carefully before proceeding.
  • Units will need to be re-paired after upgrading, See https://support.teradek.com/entries/91323093-Bolt-600-2000-Pairing for instructions.
  • Updates below apply to second generation Bolt Pro 300, 600, and 2000 only. First generation Bolt firmware is unchanged.

 

New Features

 

  • Implemented 10-bit color on SDI output when no format conversion is performed. This eliminates color banding
  • Added support for Arri/Canon/Sony recording flags
  • Added support for drop frame time code
  • Added support for record run time code
  • Added indication if camera is recording to RX time code status display

 

Changes and Improvements

 

  • Removed Transmission mode setting from Bolt Pro 2000. Unicast and Broadcast have now been combined into a single multicast mode
    • One TX can transmit to up to 4 RX units
    • DFS channels can be used
    • There are no power up/down dependencies between TX and RX (behavior of old Unicast mode)
  • Improved Connection and reconnection time in environments where non-DFS channels are available
  • Improved maximum reconnection distance
  • Improved frequency selection logic, improves signal robustness when interference is present on nearby frequencies
  • Improved format conversion engine: eliminated weaving artifacts when using deinterlacer; fixed the issue when video was not smooth when using format conversion
  • Restored time code operation on Bolt Pro 2000
  • Improved time code accuracy
  • Implemented better time code handling when input frame rate is not the same as output frame rate
  • Changed the way the time code is generated when the link is lost -- Record stop command is sent if link is lost for 5 seconds
  • Improved reconnection reliability when TX is turned off for a prolonged amount of time (an hour or more)

 

Bug Fixes

 

  • Fixed intermittent video flickering within one minute of initial connection
  • Receiver would occasionally hang when the video format changed
  • The top line of 720p50 and 1080p24 HDMI output formats was cut off
  • If only DFS channels were selected on Bolt 600 or 2000 they could not reconnect

 

Bolt Manager 3.0.7

 

New Features

 

  • Added pairing and configuration support for First generation Bolt, Bolt Pro, and Bolt 2000
  • Added pairing instructions for second generation Bolt Pro (300, 600, and 2000)
  • Added firmware upgrade support for Bolt Pro SDI TX/RX and Bolt Pro 2000 TX (see Bolt Manager for specific revisions)

 

Bug Fixes

 

  • Radio 2 version was read incorrectly
  • Transmitter pairing mode could not be activated if connected to a computer
  • Minor stability improvements and bug fixes

 

Bolt Manager 3.0.6

 

Changes/Improvements

 

  • Improved reliability of radio module firmware upgrade
  • Improved reliability and significantly increases the speed of Video Processor firmware upgrade
  • Improved reliability of USB communications with the Bolt
Be the first to review Teradek BOLT Pro 2000 HD-SDI / HDMI Wireless Video TX / RX Deluxe Kit with V Mount. Write a review
Top