Teradek TER-CUBE-205 HDMI Encoder - OLED External USB Port and Ethernet

Teradek TER-CUBE-205 HDMI Encoder - OLED External USB Port and Ethernet

Code:TER-CUBE205 Condition: New
Now £1,049.00
Was: £1,110.00 You Save: £61.00 (5%)
( £1,258.80 inc. VAT)
Item in Stock  |  Usually dispatched within 24 hours
Add to Bag
This product has been added to your basket...
  • Continue Shopping
  • Checkout
Product Info

Teradek CUBE-205 1ch HDMI Encoder & OLED & Li-Ion Bat Built in

Teradek Cube and Brik encoders provide a powerful & compact wireless solution for local monitoring and proxy recording. Both devices utilize high profile H.264 compression and support resolutions up to 1080p at 5mbps over dual band a/b/g/n WiFi or 10mbps over Ethernet. The Teradek Cube comes in HD-SDI or HDMI varieties & whereas the camera-back Brik offers HD-SDI inputs only. Each encoder has an easy to use OLED display for rapid configuration and a rechargeable Li-Ion battery & which enables users to swap external power sources without powering the unit down.

The Teradek Bolt is a wireless HD-SDI transmitter and receiver that enables sub-2ms delivery of uncompressed HD video at full 1080p60 resolution and 4:2:2 color space.

Local Monitoring on iOS Devices
Watch your live video while you’re on the move. With the Teradek Cube and Brik & directors & clients & and others on set are able to monitor every live shot on their iPad & iPhone & and laptop with a delay as low as 1/3 second. Simply connect your device directly to a Teradek encoder over the 5.8Ghz Master Mode or to a shared access point & launch Teradek’s free TeraCentral application & and select the live feed you wish to view.

HD-SDI Monitoring

If you prefer a more traditional monitoring method & the Teradek Brik can utilize its SDI loop-through for watching the action in real time on your rig or & when paired with a Teradek decoder & any Brik or Cube encoder can stream directly to a field monitor in video village at a 1/4 second delay.

Remote Monitoring

Cube and Brik also support remote monitoring for productions that have multiple sets. For example & a Cube on Set A can transmit over the Internet to a decoder at Set B where the director can view the feed at near real time. This is also a fantastic option for writers and producers to keep an eye on production from their office.

On-Board and Remote Proxy Recording

Not only can you watch the action unfold in real time on your iOS device & Teradek encoders also offer free proxy recording capabilities on both HD-SDI and HDMI models for generating instant replays or dailies. Cube and Brik encoders sense when your camera begins and ends recording and instantly creates an H.264 file with identical timecode & filename & and start/stop times on a computer connected to your local network.* Alternatively & both encoders can save proxy files on their on-board uSD and SD card slots if your set lacks an extra computer hard drive.
*HD-SDI models only

Technical Specs


  • HDMI


  • 1080i 50/59.94/60
  • 1080p 23.98/24/25/30
  • 1080PsF 23.98/24/25
  •  720p 50/59.94/60
  •  576i
  • 480i


  • Compression Algorithm: Baseline, Main and High Profile H.264
  • Main and Baseline profiles
  • Bit Rate: 250 Kbps to 10 Mbps
  • Built in Video Scaler and Deinterlacer


  • Network Protocols: TCP/IP, UDP, HTTP, DHCP,


  • Transport Protocols: RTP, RTSP, RTP over HTTP, MPEG-TS**
  • RTMP (Adobe Flash Streaming)
  • HTTP Live Steaming
  • Point to Point (TCP or UDP), Multiple Unicast (UDP), or Multicast (UDP+IGMP)**


  • Audio Compression: AAC-LC, MPEG Layer 2
  • Embedded Audio Input
  • Analogue Line or Mic in, adjustable gain
  • Headphone output, adjustable volume


  • Dimensions: 2.5"W x 3.5"D x .9"H
  • Weight: 8oz


  • Feature-rich WebUI for configuration and control
  • OLED LCD Display with joystick Navigation buttons
  • On/Off and Reset Switch
  • Micro SD
  • Powered USB 2.0 host port


  • Ethernet: 10/100BASE-T
  • USB Modem support**


  • 2 Pin Lemo Power input
  • Internal Rechargeable Lithium Ion Battery
  • USB Charging
  • Nominal Power Consumption: 3W
  • Nominal Power Consumption while Charging : up to 10W
  • Auxiliary Power Input: 6-28V DC

*Currently supporting RED One, RED Epic, Arri Alexa and select Sony and Canon cameras. Please contact Teradek Support. to confirm support for your camera first.


This product has not yet been rated, be the first to write a review!