Teradek BOLT Pro 1000 Wireless HD-SDI Transmitter - Receiver Set

Teradek BOLT Pro 1000 Wireless HD-SDI Transmitter - Receiver Set

Code:TER-BOLT-955 Condition: New
Now £3,915.00
Was: £4,725.00 You Save: £810.00 (17%)
( £4,698.00 inc. VAT)
Item in Stock  |  Usually dispatched within 24 hours
Add to Bag
This product has been added to your basket...
  • Continue Shopping
  • Checkout
  • SDI Wireless Video Tranceiver Set - 1000ft
  • Longer Range
    Transmit visually lossless video up to 1000ft with no delay
  • 20mhz Channels
    Use more than twice as many Bolts in one location or avoid interference like never before
  • 2 New DFS Channels
    Operate interference-free more often in the USA and Europe by making use of two newly introduced DFS channels
  • 20% Smaller Chassis
    Not just smaller, but lighter too, allowing these models to integrate into any rig unnoticed
  • More Robust Than Ever Before
    Reach your Bolt’s full range and potential right out of the box with new software that provides the most robust wireless link we’ve ever created
  • Rapid Reconnection
    Reconnect times during a dropped link are now instantaneous once you move back into range
  • Built-in HDMI To SDI Converter
    Perfect for use with MoVI and other gimbals, Bolt’s TX has a built-in HDMI to SDI converter, allowing you to connect both your on-camera monitor and video source via the same device
  • Individual Identity
    Easily identify which Bolt TX and RX work together with removable colored top plates
  • Metadata and timecode support
  • 3D LUTs
  • Dual inputs/outputs
  • Multicast capable
  • Manual frequency selection
  • USB 3.0 GRAB Engine included

In the Box:

  • Bolt Pro 1000 3G-SDI Video Transceiver Set
  • 1 x Teradek Protective Case waterproof with custom foam (12in x 9in x 4.5in / 30.48cm x 22.86cm x 11.43cm)
  • 5 x Wireless Antennas (2dBi 2.4/5.8GHz) - For RX
  • 2 x Wireless Antennas (2dBi 2.4/5.8GHz) - For TX
  • 1 x 2-pin Lemo to PowerTap 18 inch Cable
  • 1 x Hot Shoe Adapter (1/4"-20 inch)
  • 1 x Lightstand Adapter (1/4"-20 inch)
  • 2 x SDI (BNC to BNC) Cable 10 inch
  • 1 x HDMI 18in Cable (Type A to Type A)
  • 1 x USB 3.0 Cable A to Micro B (3.ft Length)
  • 1 x PSU 2-Pin Lemo to 18W AC Adapter 6ft cable
  • 1-Year Warranty

This product has not yet been rated, be the first to write a review!