This Tally Technologies Wireless Pro Bundle comes with everything you need for your production and broadcast studios, with a TallyTec Pro Wireless Base4 Transmitter and three Wireless Pro Receivers, including TimeSync.
The TallyTec Base4 Transmitter can support up to 4 channels for receivers, giving a wireless range of up to 2km. Powered through mains or 12v battery, this robust transmitter continuously outputs both live and preview signals from a wide variety of mixers to a receiver.
The case of the TallyTec Base4 incorporates a small screen for displaying the receiver status, an alarm button with a flashing light should a receiver deactivate, and a menu for managing the remote receivers. The transmitter also displays the battery charge level for each wireless receiver in use. The rear of the case has x4 RJ45 ports that can be used for charging the receiver and for use with wired receivers via Cat5/6 cable. The Base4 transmitter manages up to 4 receivers. The transmitter also has the ability to operate with any vision mixers using open/closed contact or +5v or -5v.
The transmitter receives information from a mixer's PGM output and sends a pulse to turn on the red LED on both the front and back of the receiver assigned to this camera. If the mixer also generates information from the selected camera's preview channel. The Base4 also transmits this channel and turns a green LED on located at the back of the receiver. The green LED can be switched off at any time if required.
Wireless Pro Receiver
The TallyTec Pro Wireless Receiver mounts easily to a camera cold shoe, steadicam, crane, jib and many more. Connected wirelessly back to the transmitter, the receiver has a range of up to 2km. The receiver provides both a green preview tally light and a red live tally light at the front and rear. The front tally lights can be turned off when required.
The wireless receivers are charged through the RJ45 when connected to the transmitter; once charged, the receiver can work up to 2 days on a single charge. The transmitter will give a warning signal when the receiver battery is low.
Now with added TimeSync which will give you a synced timecode for your camera or external recorder to sync all clips together in your timeline without any fuss. The receiver comes in a professionally finished, lightweight, tough case with standard screw thread for mounting.