Tally Technologies GBASE8RMT - TallyTec Base8 Rackmount (1U)

Product Code: TA-GBASE8RMT
Condition: Used
  • £699.00
  • (£838.80 inc. VAT)
  • RRP £699.00
Item in Stock | Usually dispatched within 24 hours

The TallyTec Pro Rack-mount offers a 8 channel solution. Designed for use in production and broadcast studios as the standard wired or wireless transmitter supporting up to 8 channels on 8 wired or 8 wireless receivers  giving a range of 2km.. Powered through mains or 12v battery this robust transmitter continuously outputs both live and preview signals from a wide variety of mixers to 8 of our camera mounted receivers by wireless or by Wired Receiver on cat5/6 cable

The transmitter receives information from a mixer’s PGM output and sends a pulse to turn on the red LED’s on the receiver assigned to this camera. If the mixer also generates information from Preview row, the TallyTec Pro transmits this and turns on the green LED located at the front and back of the receivers to keep the cameraman informed that his shot will be next on air. The front LED panel can be switched off if required.

Wired receivers are connected to the transmitter through 8 x RJ45 connectors located on the rear panel and are powered through the transmitter. The wireless are rechargeable from the Base unit and connect up to 2km from the base transmitter on . Each transmitter has 4 different ranges and each one of these ranges can support up to 8 channels in the 866/915MHz transmission waveband.

The TallyTec Pro has the ability to operate with any vision mixers using open/closed contact or +5v or -5v and is available in both desk top and rack mounted versions.

Included Accessories

  • Power Supply
  • USB cable
  • Antenna
Be the first to review Tally Technologies GBASE8RMT - TallyTec Base8 Rackmount (1U). Write a review