Sonifex CM-MS3 - Single 3 Way Passive Microphone Splitter

Product Code: CM-MS3
Condition: New
  • £174.95
  • (£209.94 inc. VAT)
  • RRP £174.95
Item in Stock | Usually dispatched within 24 hours
Loading...

CM-MS3 Single 3 Way Passive Microphone Splitter

The CM-MS3 is a passive “one-to-three” splitter housed in a small but robust aluminium box. It is designed to split a single microphone or line source to up to three destinations, using Neutrik XLR connectors.

Wide Signal Range Capability

The CM-MS3 uses high quality audio transformers that are capable of accepting input levels up to +18dBu, making the splitter useful in both microphone and line level splitting applications.

Versatile Phantom Powering Options

The CM-MS3 offers three methods of providing phantom power to a microphone connected to its input:

  • From the external +48VDC power connector.
  • From a microphone amplifier connected to output 1 (direct)
  • From a microphone amplifier connected to output 2 (phantom loopback)

 

Controlling which method is used to provide phantom power is achieved with simple push switches. It is possible to concurrently power a microphone using any two of the above methods without degrading audio performance, thus providing power supply redundancy.

Ground Loop Hum Elimination

Ground loop hum problems can be quickly eliminated using the push switches to lift pin 1 of the output connectors (output 2 and 3 only).

Test

Conditions

Results

Frequency Response• Ref. -6dBu, 1kHz
• Source impedance = 150Ω
• Load impedance = 10kΩ
10Hz - 30kHz ±0.5dB
Total Harmonic Distortion• Ref. +3dBu, 50Hz
• Source impedance = 150Ω
• Load impedance = 10kΩ
0.02%
Total Harmonic Distortion 0.1%• Ref. 0.1%THD+N, 50Hz
• Source impedance = 150Ω
• Load impedance = 10kΩ
+13dBu
Total Harmonic Distortion 1%• Ref. 1%THD+N, 50Hz
• Source impedance = 150Ω
• Load impedance = 10kΩ
+18dBu
Common Mode Rejection Ratio• Ref. 20kHz
• Source impedance = 600Ω
• Load impedance = 10kΩ
>60dB
   

Connections

  
Inputs:1 x XLR 3 pin female (balanced, can be unbalanced) 
Outputs:3 x XLR 3 pin male (balanced, can be unbalanced) 
DC Phantom Power Input:+48V DC, 2.5mm socket 
   

Equipment Type

CM-MS3Single 3 way passive microphone splitter. 
   

Physical Specification

Dimensions (Raw):7.7cm (W) x 8.3cm (D) x 4.2cm (H)
3.0” (W) x 3.3” (D) x 1.7” (H)
 
Weight:Nett: 0.30kg Gross: 0.40kg
Nett: 0.66lbs Gross: 0.88lbs
 
Be the first to review Sonifex CM-MS3 - Single 3 Way Passive Microphone Splitter. Write a review
Top