These controllers focus on a single, narrowed down task which makes them perfect as interfaces for untrained operators, as a remote controller on your camera rig or a small monitor device squeezed into a crack between other bulky devices in your OB van. The SKAARHOJ Micro Series is the worlds smallest, wired, all-included Ethernet controller series. All devices offer PoE (Power over Ethernet) as an option which allows you to connect only a single ethernet cable for both power and communication. This makes it extremely simple and handy to connect and use these devices. Everything is included in the box, it will communicate directly over IP with any device we offer protocols for, just connect ethernet and power. The units are configurable through the standard SKAARHOJ web interface as well and programming and firmware upgrades are done via a standard micro-USB cable. The various types below are described with their standards shipping software installed, but in the usual SKAARHOJ style you can ask us to reprogram them as you like (or do it yourself!) to do any other thing you can imagine. That’s the beauty and freedom of Open Source and SKAARHOJs customization services. Size 9.2 x 5.7 x 2.6 cm.
This is a boiled down concentrate of our usual 8 channel GPIO solutions, only here each pin is both input and output! It means; You have to specify which function a pin has in the web interface. But other than that, you can enjoy the extensive configuration options known from our usual GPIO products which allows you to connect inputs to multiple functions in an ATEM switcher or flip the outputs in response to any setting in an ATEM switcher, such as a given input being on Program etc. The inputs are activated by shorting a given pin to the common GND pin on the Phoenix connector. Likewise, if a pin is an output, it will short the pin to GND when activated. In this sense, electrically it remains compatible with our other GPIO products as well as BlackMagic Designs GPIO box.