Sennheiser K6 Powering Module (phantom or battery powered) - 003279

Sennheiser K6 Powering Module (phantom or battery powered) - 003279

Code:K6 Condition: New
Now £155.00
Was: £159.00 You Save: £4.00 (3%)
( £186.00 inc. VAT)
Item in Stock  |  Usually dispatched within 24 hours
Add to Bag
This product has been added to your basket...
  • Continue Shopping
  • Checkout

The K6 powering module is the heart of this Sennheiser professional modular microphone system and can be powered either by its internal 'AA' size 1.5 V battery or by 12 - 48 V phantom power. The K6 can be combined with different condenser microphone heads to provide a wide variety of polar patterns. Matt black, anodised scratch-resistant finish.


  • Switchable bass roll-off filter protects against rumble, handling, pop and wind noise
  • On/off switch with battery test
  • High output, low noise
  • Transformerless balanced output on 3-pin XLR connector
Dimensions d 22 x 94 mm (netto)
Frequency response (microphone) 30 - 20000 Hz +- 1 dB
Transducer principle (Microphone) Pre-polarised condenser microphone
Weight ca. 45 g
Nominal impedance 200 Ω
Min. terminating impedance 1000 Ohm Phantom
Operating time max. 150 h
Gain 0 dB
Current consumption 2,2 mA
Output voltage 2 V Phantom
Battery Specification 12 - 48 V 1x Typ IEC LR 06 Phantom

What's in the box?

  • 1 K6 powering module
  • 1 MZQ 200 microphone clamp
  • 1 AA battery
  • 1 protective carrying case

This product has not yet been rated, be the first to write a review!