Sennheiser K 6-P-C Powering module for phantom powering - 003280

Sennheiser K 6-P-C Powering module for phantom powering - 003280

Code:K 6-P-C Condition: New
Now £115.83
Was: £139.00 You Save: £23.17 (17%)
( £139.00 inc. VAT)
Item in Stock  |  Usually dispatched within 24 hours
Add to Bag
This product has been added to your basket...
  • Continue Shopping
  • Checkout

The K6P powering module is at the heart of Sennheiser's professional modular condenser microphone system. It is similar to the K6 powering module but is powered by 12 - 48 V phantom power only, for use where battery power is not required (e.g. permanent installations). The K6P can be combined with various microphone heads to produce microphones with a variety of pick-up patterns. Matt black, anodised, scratch-resistant finish.


  • Switchable bass roll-off filter protects against rumble, handling, pop and wind noise
  • On/off switch
  • High output, low noise
  • Transformerless balanced output on 3-pin XLR connector
Dimensions d 22 x 52 mm (netto)
Frequency response (microphone) 30.....20000 Hz +- 1 dB
Transducer principle pre-polarised condenser microphone
Nominal impedance 200 Ohm, symm.
Min. terminating impedance 1000 Ohm Phantom
Gain 0 dB
Current consumption 2,2 mA
Output voltage 2 V (1 kHz)
Battery Specification 12 - 48 V

What's in the box?

  • 1 K6P powering module
  • 1 MZQ 200 microphone clamp
  • 1 protective carrying case

This product has not yet been rated, be the first to write a review!