Motorise your V-Slider or V-Slider Mini with this lightweight motor kit to add precision to your shots.
NOTE: Slider not included.
Motorise your V-Slider or V-Slider Mini with this lightweight motorising kit.
Motorised sliders have been too expensive for too long. We are here to change that.
Multiple speed ranges - continuous motion with a huge range of speeds available (3 V-Motion motors on offer) Power options: our controller accepts 12V DC so you can use your favourite power supply. we’ve included a battery pack in case you don’t have any. Easy setup: assemble your kit in minutes. This kit is designed to be as simple as possible. No extra tools needed. Two alternative setups: if the camera head you're using is very large, don’t worry, we've included all the parts for a reversed assembly where the motor is turned upside down (check photo).
V-Motion Lite Controller - choose speed and direction of movement (left or right) Set of mechanical parts - to attach the motor to your slider Battery pack - power up your kit with 8 AA batteries (batteries not included) You can also buy an AC Power Adaptor to use the mains as an alternative power source.
Load capacity Tested with 10 Kg with a fully horizontal V-Slider. Inclination will influence performance.
Third-party power sources You can use a third-party power source with your V-Motion Lite as long as it is rated at 12V DC and has a standard DC barrel jack.
If you use an AC adaptor make sure it is rated at 2A or more.
1 1x V-Motion Motor
2 1x Belt
3 1x 3mm Hex Key
4 1x AA Battery Pack (for 8x AA batteries)*
5 1x V-Motion Controller
6 2x Knob
7 2x T-Nut
The parts below are only required if you use the reversed assembly:
8 1x 2.5mm Hex Key
9 1x 1.5mm Hex Key
10 4x 25mm screws
11 4x Black Spacers