(0)
£0.00
Paralinx Tomahawk SDI 1:2 DELUXE Package V-Mount
  • Paralinx Tomahawk SDI 1:2 DELUXE Package V-Mount
  • Paralinx Tomahawk SDI 1:2 DELUXE Package V-Mount

Paralinx Tomahawk SDI 1:2 DELUXE Package V-Mount

Code:PAR-THS2DV Condition: New
£11,070.00
( £13,284.00 inc. VAT)
Item in Stock  |  Usually dispatched within 24 hours
Add to Bag
This product has been added to your basket...
  • Continue Shopping
  • Checkout
  • All your Tomahawk gear in one convenient package
  • Tomahawk SDI 1:2 Deluxe Package (V-Mount) with Custom Pelican 1550 Case
  • Battery plates, cables and brackets included
  • Lightweight Minimalist design for Handheld, Steadicam, Gimbal, and UAV Payload
  • Transmitter features 3G-SDI input and loop-out. Receiver features dual 3G-SDI outputs.
  • Rugged machined-aluminum enclosure for the transmitter and ABS enclosure for receiver
  • Ultra long-range transmission - Up to 2,000 feet (600 meters) *
  • REAL-TIME viewing - Less than 1 millisecond latency
  • Uncompressed full-HD video signal allow critically accurate monitoring
  • Multicast capable (up to 4 receivers per transmitter)
  • 128 bit AES Encryption - Secure transmission
  • Operates on 5gHz frequency band
  • Conforms to major technical and environmental standards including FCC, CE, MIC (TELEC) and RoHS Specifications
  • Supported Frame rates
  • 23.98p | 24p | 25p | 29.97p | 30p | 50i | 50p | 59.94i | 60i | 60p
  • * Range may vary depending on environment and interference

In the Box:

  • 1 x Paralinx Tomahawk transmitter (SDI)
  • 2 x Paralinx Tomahawk receivers
  • 3 x 18" PTap to Lemo Cables (45cm)
  • 1 x 24" 2-pin Lemo-type to 2-pin Lemo-type Cable (60cm)
  • 2 x 18" Right-Angle to Right-Angle BNC Cables (45cm)
  • 1 x Paralinx Sidearm transmitter mounting bracket
  • 2 x Paralinx Perch receiver mounting brackets
  • 1 x Paralinx Array MIMO panel antenna for receiver (V-Mount)
  • 5 x Type-N to RP-SMA Cables for use with Array
  • 2 x Battery Plate (female) for powering each receiver (V-Mount)
  • 2 x Battery Plate (male) for mounting Array to receiver (V-Mount)
  • 1 x 18dbi Attenuator for talkback channel on Array
  • 2 x Standard 5dbi Antennas for transmitter
  • 10 x Standard 2dbi Antennas for receivers
  • 2 x AC Adapters for receivers
  • 1 x IR Cable and Remote for menu access
  • 1 x Mini-USB to USB Cable (for future firmware updates)
  • 1 x Custom Pelican 1550 Case (holds 2 Tx, 3 Rx, 2 Arrays, accessories)

Dimensions

  • (Tx): 4" x 2.5" x 0.8" (not including antennas)
  • (Tx): 108mm x 67mm x 21mm
  • (Rx): 5" x 5.6" x 1.3" (not including antennas)
  • (Rx): 143mm x 128mm x 33mm

Weight

  • (Tx): 6.6oz / 187g (without antennas)
  • (Rx): 12oz / 340g (without antennas)

This product has not yet been rated, be the first to write a review!