UK Distributor

Niagara B264 HD Encoder - Single Channel H.264 HD (up to 1080i) Broadcast Encoder with ASI and IP outputs and balanced audio inputs

Product Code: 96-01600
Condition: Used
  • £5,415.00
  • (£6,498.00 inc. VAT)
  • RRP £5,415.00
Item in Stock | Usually dispatched within 24 hours

24x7 operation for demanding applications

The GoStream B264 encoder is designed for broadcast applications but can also be used for other applications such as IPTV and Internet streaming. There are two base models; the B264-IP which has IP outputs and the B264-AIP which has both ASI and IP outputs. The encoder is available in a single and dual channel configuration. All of the popular IP output protocols are supported.


Each model is available as a single or dual channel encoder. The IP model supports common IP protocols such as UDP, Adobe Flash and Apple’s HLS. The AIP model add RTP with SMPTE 2022 FEC as well as an ASI output

Reliability at an affordable cost

The encoder is based on hardware compression. It consumes very little power and has a small form factor.


Ideal Solutions

> Broadcasters

> Houses of worship

> Boardroom

> Government

> Network service providers

> Education


> Remote streaming

> Webcasting



Key Attributes

> Suitable for broadcasters but affordable for other markets as well.

> Input can be set to auto-detect or for manual selection

> ASIC compression and Linux ensure 24x7 operation

> Client software and SNMP provide setup, control and monitoring

Video Encoding Formats:

Adobe® Flash® H.264 (RTMP)

Apple® HTTP Live Streaming (HLS)

MPEG 2 Transport Stream, UDP and RTP


Audio Encoding Formats:


MPEG1 Layer II

Up to 4 channels per video channel (2 Pairs)

AC-3 Pass through

Balanced or Unbalanced Analog Inputs (2 pairs)

Video Format:

HD: SMPTE 424M and 292M SDI standards

SD: SMPTE 259M SDI, Analog NTSC and PAL


4 x 1 Gbit ports (auto sensing)

2 x SDI Inputs

2 xASI Outputs

2 x Balanced Analog Audio Inputs (Terminal block) or

2 x Unbalanced Analog Audio Inputs (RCA)


Client software for PC, Mac and Linux



ASIC based hardware compression

Control and Streaming Enternet Ports

IP and ASI outputs


CEA 608 and 708



3 lb (1.36 Kgs)


1.73” H x 5.7” W x 14” D ( 3 will fit in 1 RU)  (44mm x 146 x 356mm)


12 W maximum

Additional Contents:

DVI-I - HDMI and DVI - VGA adapters included

Component breakout, BNC - RCA adapters, BNC - S-Video cable

Hardware Warranty

3 year hardware and software warranty

Be the first to review Niagara B264 HD Encoder - Single Channel H.264 HD (up to 1080i) Broadcast Encoder with ASI and IP outputs and balanced audio inputs. Write a review