(0)
£0.00
Matrox MC-100 Dual SDI to HDMI Mini Converter for 3G/3D/HD/SD
  • Matrox MC-100 Dual SDI to HDMI Mini Converter for 3G/3D/HD/SD
  • Matrox MC-100 Dual SDI to HDMI Mini Converter for 3G/3D/HD/SD
  • Matrox MC-100 Dual SDI to HDMI Mini Converter for 3G/3D/HD/SD
  • Matrox MC-100 Dual SDI to HDMI Mini Converter for 3G/3D/HD/SD
  • Matrox MC-100 Dual SDI to HDMI Mini Converter for 3G/3D/HD/SD
  • Matrox MC-100 Dual SDI to HDMI Mini Converter for 3G/3D/HD/SD
  • Matrox MC-100 Dual SDI to HDMI Mini Converter for 3G/3D/HD/SD

Matrox MC-100 Dual SDI to HDMI Mini Converter for 3G/3D/HD/SD

Code:MC-100 Condition: New
Now £360.00
Was: £380.00 You Save: £20.00 (5%)
( £432.00 inc. VAT)
Item in Stock  |  Usually dispatched within 24 hours
Add to Bag
This product has been added to your basket...
  • Continue Shopping
  • Checkout

Dual SDI to HDMI Mini Converter for 3G/3D/HD/SD
Monitor · Distribute · Switch · Multiplex · Converge

As a broadcast engineer or A/V professional you likely have diverse needs when it comes to managing SDI signals within your environment - for monitoring, distributing, switching, multiplexing, and processing 3D in real time. Until now, you have been forced to purchase different devices to perform these tasks. The new Matrox MC-100 solves all these challenges in one inexpensive, easy-to-use device.

Matrox MC-100 is a dual SDI to HDMI mini converter that supports a wide range of display resolutions through 3G, Dual Link, HD, and SD-SDI. This single portable unit can be used as a HD-SDI switcher, a distribution amplifier, a multiplexer, and a 3D processing unit, making it the most versatile mini converter on the market. It should be in every video professional's toolbox.

Monitor SDI on inexpensive HDMI displays
Take your SDI video signal with 16 channels of embedded audio and convert it to HDMI. Whether you're using RGB or YUV, Matrox MC-100 maintains the full 10-bit video spectrum of the signal, up to a resolution of 1920 X 1080. Eight channels of embedded audio are supported on HDMI, selectable between the first and second set of 4 pairs.

 

Configure using On-Screen-Display
Quickly and efficiently configure your Matrox MC-100 via the on-screen-display (OSD) menu available on all outputs. There is no need for a computer connection. Every MC-100 feature is accessible through the OSD, which is controlled by three buttons directly on the unit. User-defined presets can be saved to dip switches for even quicker setup.

 

Process and monitor 3D HD-SDI signals in real time
Use the cutting-edge processing power of MC-100 to make multiple adjustments on stereoscopic video feeds in real time. Hardware buttons let you perform Horizontal Image Translation (HIT)—pixel-based convergence and divergence—on both video inputs. The images can be flipped horizontally and/or vertically, with pixel-based offset controls. Monitoring 3D content can be done on the HDMI or SDI outputs, with several analysis modes such as anaglyph, difference and 50/50. The signal can then be sent on a single SDI cable as a side-by-side or an over/under feed. On HDMI it can be sent in side-by-side, over/under, or frame packing mode. MC-100 also features a built-in video frame synchronizer that is useful for 3D production. When you define one of the video inputs as the reference source, the unit time base corrects the second video input and outputs the two video streams in sync.

 

Dimensions
  • Length: 125 mm
  • Width: 118 mm
  • Height: 26 mm
  • Weight: 220g
Inputs and Outputs
  • Two BNC 3G/HD/SD-SDI inputs
  • Two BNC 3G/HD/SD-SDI outputs
  • HDMI output
  • Mini USB Type B for firmware updates
Standards
  • SDI compliance with SMPTE-259M/292M/372M/424M/425M
  • SDI support of YUV 4:2:2 8-bit/10-bit
  • SDI redundant inputs with loss-of-signal switcher
  • Automatic SDI output selection between 3G/HD/SD-SDI dependent on input signal
  • HDMI support of YUV 4:2:2, and RGB
Advanced Features
  • Glitch-free switching as per SMPTE RP-168
  • Multiplexing of two HD-SDI signals over a single 3G cable as per SMPTE-425M level B
  • Vertical and/or horizontal flips on both video channels
  • Pixel-based convergence adjustments on both video channels
  • Pixel-based vertical offsets on both video channels
  • Video time base corrector and frame synchronizer using SDI1 or SDI2 as reference input
Input Display Resolutions
  • NTSC
  • PAL
  • 720p 50/59.94/60
  • 1080i 50/59.94/60
  • 1080p 23.98/24/25/29.97/30
  • 1080PsF 23.98/24/25/29.97/30
  • 1080p (Level A) 50/59.94/60
  • 1080p (Level B) 50/59.94/60
  • 1080p Dual link 50/59.94/60
Display Formats
  • 3D display formats on SDI: Over/Under, Side-by-Side
  • 3D display formats on HDMI: Over/Under, Side-by-Side
  • Frame Packing
  • Analysis display modes: Anaglyph, 50/50, Difference
Audio
  • SDI audio: 16 channels embedded
  • HDMI audio: 8 channels embedded, selectable between the first and second set of 4 pairs
Electrical and Operating Requirements
  • Unit voltage and amperage: 5V/3Amps
  • Operating temperature: 0 to 40º C
  • Storage temperature: -40 to 75º C
  • Maximum altitude for operation: 3,000 meters
  • Maximum altitude for transport: 12,000 meters
  • Operating humidity: 20 to 80% relative humidity (non-condensing)
  • Storage humidity: 5 to 95% relative humidity (non-condensing)
General
  • Universal locking power supply with international socket adapters included 3-year limited manufacturing warranty

This product has not yet been rated, be the first to write a review!