Marshall V-MD72-3GSDI (VMD723GSDI) V-MD72 Pre Loaded with 2 MD-3GSDI modules

Product Code: V-MD72-3GSDI
Condition: Used
  • £2,644.00
  • (£3,172.80 inc. VAT)
  • RRP £2,644.00
Item in Stock | Usually dispatched within 24 hours
Loading...

Marshall Electronics proudly presents the MD series of rack mount monitors that offer a flexible modular solution to system integration.

These rack-mountable monitors can be configured with a variety of video inputs that can be swapped" or interchanged in the field based on your evolving needs and requirements. This eliminates the need to upgrade or replace equipment when a different input or application is required. This "future proof" solution provides flexibility and reassurance when necessary & especially in multi-monitor rack mount units.

The V-MD72-3GSDI offers two 800 x 480 LED-backlit LCDs in one single configuration & along with excellent viewing angles. The V-MD72-3GSDI feature list includes Status Display & False Color Filter & IMD (In-Monitor Display) & Network Control & Markers & Freeze Function & Color Temperature Presets & RGB Gain / Bias Adjust & Pixel-to-Pixel & Blue Gun & Hard Tally & user-definable function buttons & and more. A variety of modules will become available including the availability of HDMI with loop-through & Fiber-Optic input/output modules & and more.

Marshall's MD monitors integrate Telecast Fiber System's TeleCube™ Fiber-Optic HD-SDI transmission input/output modules. These fiber modules deliver the industry's broadest range of digital rates while maintaining pristine signal quality that broadcasters and integrators demand.

FALSE COLORS

The False Color filter is used to aid in the setting of camera exposure. As the camera Iris is adjusted, elements of the image will change color based on the luminance or brightness values. This enables proper exposure to be achieved without the use of costly, complicated external test equipment. To best utilize this feature, you must understand the color chart and have a basic understanding of camera exposure. Normally, when shooting subjects like people, it is common practice to set exposure of faces to the equivalent of approximately 56 IRE. The False Color filter will show this area as the color PINK on the monitor. Therefore, as you increase exposure (open the IRIS), your subject will change color as indicated on the chart: PINK, then GREY, then a few shades of YELLOW. Overexposed subjects (above 101 IRE) on the monitor will be shown as RED. In addition, underexposed subjects will show as DEEP-BLUE to DARK-BLUE, with clipped-blacks indicated with a FUCHSIA-like color. Lastly, the color GREEN is used to indicate elements of the image that are approximately 45 IRE. This represents a \"neutral\" or \"mid-level\" exposure commonly used for objects (not people).

NETWORK CONTROL

Each V-MD series rack includes a LAN port with a built-in web server. This allows the operator to visually monitor and control any or all V-MD series units that are connected to the LAN. Any function that is addressable from the front panel of a V-MD series monitor can be accessed via any popular web browser -- even those running on a wireless device.** The rear panel LAN 100 port connects the unit to the LAN.

Once connected, the user simply locates the IP address of any one of the units connected to the LAN. This is accomplished by going to the MAIN MENU of any of the connected units and selecting the NETWORK CONFIGURATION submenu. This will then display the IP address of that unit. V-MD units are shipped with the DHCP mode enabled.

Simply type this IP address into the address bar of your browser and the home page for that unit will appear. It is possible to poll your LAN for all other MD units connected by accessing the NETWORK tab from the Top Menu.

The user can then control multiple networked MD monitors at once using a single browser page. The user may select which monitor(s) they wish to control and send commands to those particular monitors. The browser provides real-time status of any connected monitor, ensuring consistent signals / feeds and so forth.

<spanincluded\"">Click on image to enlarge

** A wireless hub must be part of the LAN to have this function.

IMD & Tally Configuration

Use the \"Text Enable\" function to turn the MD Text feature ON. This will cause the \"Text String\" to appear on the lower portion of the screen. This provides the user with a 16 character on-screen text string. The color, background (opacity), and alignment of text can also be managed by the operator. This same menu allows control of Tally Source. Tally lights (both LED and on-screen) can be enabled/disabled and also set to match \"Text String\" color.

<tdafooter\"" colspan="\"2\"" align="\"right\"" bgcolor="\"#666666\"">SPECIFICATIONS<tdspecs\"" bgcolor="\"#efefef\"" width="\"39%\"" height="\"9\"">Display (Viewing Area)<tdspecs\"" height="\"9\"">7\" x 2<tdspecs\"" bgcolor="\"#efefef\"" width="\"39%\"">Resolution (Pixels)<tdspecs\"" width="\"61%\"" height="\"13\"">800 x 480<tdspecs\"" bgcolor="\"#efefef\"" width="\"39%\"">Aspect Ratio<tdspecs\"" width="\"61%\"" height="\"13\"">16:10<tdspecs\"" bgcolor="\"#efefef\"">Pixel Pitch (h x v)<tdspecs\"">0.1905mm x 0.1905mm<tdspecs\"" bgcolor="\"#efefef\"" width="\"39%\"">Brightness (in cd/m²)<tdspecs\"" width="\"61%\"">450<tdspecs\"" bgcolor="\"#efefef\"">Included Inputs<tdspecs\"">3G-SDI<tdspecs\"" bgcolor="\"#efefef\"">Optional Input Modules<tdspecs\"">HDMI, DVI, Dual HD-SDI, FIBER-OPTIC<tdspecs\"" bgcolor="\"#efefef\"" height="\"14\"">Dimensions<tdspecs\"" height="\"14\"">18.9\"W x 5.2\"H x 1.2\"D<tdspecs\"" bgcolor="\"#efefef\"" height="\"14\"">Weight<tdspecs\"" height="\"14\"">5 lbs.<tdspecs\"" bgcolor="\"#efefef\"" width="\"39%\"" height="\"16\"">Power Consumption<tdspecs\"" width="\"61%\"" height="\"16\"">3 Amp @ 12VDC

Be the first to review Marshall V-MD72-3GSDI (VMD723GSDI) V-MD72 Pre Loaded with 2 MD-3GSDI modules. Write a review
Top