The OPS−1 is an internal HDBaseT receiver that is compatible with all display devices using the standard Intel OPS slot. It can be used to receive HDMI, bidirectional RS−232 and Ethernet signals from any HDBaseT transmitter.
2K & 4K Support.
HDMI Support - Deep Color, x.v.Color™, Lip Sync, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS−HD, CEC.
Looping HDBaseT Input - EDID, Ethernet, RS−232, audio and video.
Bi-directional RS-232 Support - Commands and data can flow in both directions via the internal RS−232 interface, allowing status requests and remote control of the destination unit.
Power - Received from the display over the OPS connector.
System Range- 100m (330ft). - 1080P/60Hz.
Cable - For optimum range and performance using HDBaseT™, use Kramer's BC−HDKat6a cable. Note that the transmission range depends on the signal resolution, source and display used. The distance using non−Kramer CAT 6 cable may not reach these ranges.
Be the first to review Kramer OPS-1 HDBaseT Receiver Compatible with all Devices Supporting the Standard OPS Slot. Write a review