Kramer WP-572 HDMI over 1 x DGKat™ Twisted Pair Receiver

Product Code: WP-572
Condition: Used
  • £199.00
  • (£238.80 inc. VAT)
  • RRP £199.00
Item in Stock | Usually dispatched within 24 hours
Loading...

Kramer WP-572 HDMI over 1 x DGKat™ Twisted Pair Receiver


Requires Shielded Twisted Pair Cable

Max. Data Rate − 4.95Gbps (1.65Gbps per graphic channel)

Size - Wall Plate - 1 gang US.

Audio - E

The WP−572 is a DGKat™ twisted pair receiver for HDMI signals. The WP−571 converts an HDMI signal to a single twisted pair signal and the WP−572 converts the twisted pair signal back to an HDMI signal.

Max. Data Rate  - 4.95Gbps (1.65Gbps per graphic channel).

HDTV Compatible.

HDCP Compliant.

DGKat™ Signal Integration  - Kramer’s unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables. We strongly recommend using Kramer DGKat™ cables designed specifically for optimum performance.

HDMI Support  - x.v.Color™, up to 7.1 Uncompressed Audio Channels.

3D Pass-Through.

System Range  - Up to 90m (295ft) at 1080i, or up to 30m (98ft) at 1080p on shielded BC−DGKat524 cable. Up to 90m (295ft) at 1080i, or up to 70m (230ft) at 1080p on shielded BC−DGKat623 cable. Up to 100m (330ft) at 1080i or up to 90m (295ft) at 1080p on shielded BC−DGKat7a23 cable.

Cable  - Requires shielded twisted pair (STP) cable. For optimum range and performance use, use Kramer's BC−DGKat524, BC−DGKat623 and BC−DGKat7a23 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non−Kramer CAT 5, CAT 6, and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.

EDID PassThru  - Passes EDID signals between the source and display.

ON LED  - Lights red when receiving power only, orange when either input or output and power are attached, and green when both an active input and output are attached.

Power Connect™ System  - A single connection to the transmitter powers the receiver.

Dimensions  - 3.3cm x 3.6cm x 10.4cm (1.3" x 1.42" x 4.1") W, D, H.

Wall Plate Size  - 1 gang US.

Applications:

Board, conference, and training rooms.

Presentation systems.

Signal distribution and home theater.

 

INPUTS: 1 DGKat™ twisted pair on a RJ−45 connector.

OUTPUTS: 1 HDMI connector.

BANDWIDTH: Up to 4.95Gbps data rate (1.65Gbps per graphics channel).

COMPLIANCE WITH HDMI STANDARD: Supports HDMI and HDCP.

POWER CONSUMPTION: US: 12V DC, 190mA (single device); 360mA total (when one device supplies the power to both devices). UK, BG: 12V DC, 150mA (single device); 310mA total (when one device supplies the power to both devices).

DIMENSIONS: US: 3.3cm x 3.6cm x 10.4cm (1.3" x 1.42" x 4.1") W, D, H;

UK: 8.63cm x 4.5cm x 8.63cm (3.4" x 1.77" x 3.4") W, D, H;

BG: 8.04cm x 4.5cm x 8.04cm (3.17" x 1.77" x 3.17") W, D, H.

WEIGHT: 0.08kg (0.18lbs).

INCLUDED ACCESSORIES: Power supply.

 
Be the first to review Kramer WP-572 HDMI over 1 x DGKat™ Twisted Pair Receiver. Write a review
Top