Kramer PT-562 HDMI / IR Over 2 x CAT 5 Receiver PowerConnect™
Requires Shielded Twisted Pair Cable
Max. Data Rate − 4.95Gbps (1.65Gbps per graphic channel)
Bi−directional IR Support
Rack Kit - RK-4PT
Audio - E
The PT−562 is a twisted pair receiver for HDMI and IR signals. The PT−561 converts an HDMI and IR signal to a twisted pair signal and the PT−562 converts the twisted pair signal back to an HDMI and IR signal.
Max. Data Rate - 4.95Gbps (1.65Gbps per graphic channel).
Bidirectional IR Support - IR is compatible with a Kramer transmitter and via a Kramer external remote IR receiver: C−A35M/IRR or C−A35M/IRE or C−A35M/2IRE.
Optional IR Emitter Cables - C−A35/IRE−10 single emitter & C−A35/2IRE−10 dual emitter.
Optional External IR Receiver Cable - C−A35M/IRR−3 and C−A35M/IRR−50.
System Range - Up to 90m (295ft) at 1080i, or up to 30m (98ft) at 1080p on shielded BC−DGKat524 cable. Up to 90m (295ft) at 1080i, or up to 70m (230ft) at 1080p on shielded BC−DGKat623 cable. Up to 100m (330ft) at 1080i or up to 90m (295ft) at 1080p on shielded BC−DGKat723 cable.
Cable - Requires shielded twisted pair (STP) cable. For optimum range and performance use, use Kramer's BC−DGKat524, BC−DGKat623 and BC−DGKat723 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non−Kramer CAT 5, CAT 6, and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.
EDID PassThru - Passes EDID signals between the source and display.
Status LEDs - ON (red), transmit (green).
Power Connect™ System - A single connection to the transmitter powers the receiver.
Ultra-Compact Pico TOOLS™ - 4 units can be rack mounted side−by−side in a 1U rack space with the optional RK−4PT rack adapter.
Board, conference, and training rooms.
Signal distribution and home theater.
INPUTS: 2 CAT 5 IN on RJ−45 connectors.
OUTPUTS: 2 CAT 5 OUT on RJ−45 connectors, 1 HDMI connector.
IR PORT: Bidirectional on a 3.5mm mini jack.
BANDWIDTH: 4.95Gbps (1.65Gbps per graphic channel).
COMPLIANCE WITH HDMI STANDARD: Supports HDMI 1.2 and HDCP.
POWER CONSUMPTION: 5V DC, 440mA (transmitter and receiver together).
DIMENSIONS: 6.2cm x 5.2cm x 2.4cm (2.4" x 2.1" x 1") W, D, H.
WEIGHT: 0.14kg (0.3lbs).
INCLUDED ACCESSORIES: Power supply.
OPTIONS: RK−4PT 19” rack mount adapter.