CPH-200E is designed as the HUB unit (CP HUB) for Ikegami's network capable control system.
8 Control Panel connection capability 8 Control Panel connection available and panels can be connected with current CP Cables. No external power supply required for control panels since DC+12V is supplied from CPH-200E via CP cable.
2 Network Port facility The coaxial connector for the network prepares two, and can separate the network in two systems electrically. It can be made easily to maintain by separating the network electrically. Moreover, it is also possible to increase connected number of BS/CCU and the control panel by connecting two or more HUBs.
Power: AC100-240V 1.5-0.8A 50-60Hz, The power supply to the control panel is contained.
Operating temperature: 0°C - +45°C
Storage temperature: -25°C - +60°C
Ambient humidity: 30% - 90% No condensation
External dimensions: W217xH38.6xD400 mm (Width/Height/Depth)
MCP/OCP REMOTE: 8 channels Network command
OCP-200 MAX Cable: 50m CP Cable MCP-200 MAX Cable: 30m CP Cable MCP-200 EXT Power: 50m
MIN Cable Length: 1m CP Cable
Coaxial network: 2 channels (Network command)
Transfer rate: 5 Mbps
Number of maximum nodes: 255 nodes/1 network
The maximum in one network extension distance: 3.2km
The maximum extension distance between nodes(two nodes) : 400m(Reference value) 5C-FB Corresponding. Coaxial network 210m(Reference value) 3C-2V Corresponding. Coaxial network
Minimum extension distance between nodes: 1m(Reference value)
Number of maximum nodes: 10 units/280m (Reference value) 5C-FB Corresponding 10 units/130m (Reference value) 3C-2V Corresponding
Be the first to review Ikegami CPH-200 Control Hub (ARCNET system). Write a review