BSH-200E is designed as the HUB unit (BS HUB) of which employs command converter for Ikegami's existing non-network capable BS/CCU to use under network control system.
6 BS/CCU connection capability Control Panel connection available and panels can be connected with current CP Cables. Employs CPUs for each channel to have compatibility with both current ICCP(Ikegami Camera Control Protocol) and new Network Command.
3 Network Port facility The coaxial connector for the network prepares three, and can separate the network in two systems electrically. It can be made easily to maintain by separating the network electrically. Moreover, it is also possible to increase connected number of BS/CCU and the control panel by connecting two or more HUBs.
Preview output facility Employs preview connector as same as current OCP has, preview function is available even if in case of assignable operation.
Power AC100-240V 0.35-0.2A 50-60Hz
Operating temperature: 0°C - +45°C
Storage temperature: -25°C - +60°C
Ambient humidity: 30%-90% No condensation
External dimensions: W217xH38.6xD400 mm (Width/Height/Depth)
BS/CCU REMOTE: 6 channels ICCP
MAX Cable: 300m CP Cable
Coaxial network 3 channels Network command
Transfer rate: 5 Mbps
Number of maximum nodes: 255 nodes/1 network
The maximum in one network extension distance: 3.2km
The maximum extension distance between nodes(two nodes) : 400m(Reference value) 5C-FB Corresponding. Coaxial network 210m(Reference value) 3C-2V Corresponding. Coaxial network
Minimum extension distance between nodes: 1m(Reference value)
Number of maximum nodes: 10 units/280m (Reference value) 5C-FB Corresponding 10 units/130m (Reference value) 3C-2V Corresponding
Be the first to review Ikegami BSH-200 Base Station Hub. Write a review