DPA SMK4060 Stereo Microphone Kit with 4060

DPA SMK4060 Stereo Microphone Kit with 4060

Code:SMK4060 Condition: New
( £780.00 inc. VAT)
Item in Stock  |  Usually dispatched within 24 hours
Add to Bag
This product has been added to your basket...
  • Continue Shopping
  • Checkout

SMK4060 Stereo Mic Kit w. 4060

The SMK4060 Stereo Microphone Kit is a cost-effective and flexible stereo recording solution aimed at project studios and for discreet mic setup on stage. 

The SMK4060 combines two d:screet™ SC4060s Omnidirectional Miniature Microphones, Hi-Sens, with a variety of mounting accessories. These include the BLM6000 Boundary Layer Mount, which can be used in conjunction with a SC4060 (or any of d:screet™ miniature mics) to place the mic on a reflective boundary such as a floor, wall, ceiling, piano lid etc, enabling them to capture the ambient sound of the area. The sound captured from this “pressure zone” has higher sensitivity, clarity and intelligibility compared to the sound captured from the "free air" and serves as a kind of acoustical zoom. 

Also included in the kit is among others the DMM0007 soft rubber holder. This allows all kinds of instruments, from acoustic guitar through grand piano to drums, to be mounted in the best-sounding position, using special non-marking adhesive discs 

What is in the box

The DPA SMK4060 Stereo Microphone Kit contains:

2 x SC4060 Omnidirectional Mic, Hi-Sens, Black, 3 meter cable, and soft boost grids

2 x BLM6000-B Boundary Layer Mount, Black

2 x DAD6001-BC MicroDot to 3-pin XLR (P48) w. Belt Clip

1 x DMM0007 Universal Surface Mount, 5 pcs.

2 x DMM0011-B Magnet Mount, Black

1 x DUA0560 Windscreen, Black, 5 pcs.

2 x MHS6005 Microphone Holder for Strings

Directional characteristics: Omnidirectional
Principle of operation: Pressure
Cartridge type: Pre-polarized condenser element with vertical diaphragm
Frequency range, ± 2 dB: Soft boost grid: 20 Hz - 20 kHz, 3 dB soft boost at 8 - 20 kHz, High boost grid: 20 Hz - 20 kHz ±2 dB, 10 dB boost at 12 kHz
Sensitivity, nominal, ±3 dB: 20 mV/Pa; -34 dB re. 1 V/Pa
Equivalent noise level A-weighted: Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))
Equiv. noise level ITU-R BS.468-4: Typ. 35 dB (max. 38 dB)
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): 71 dB(A
Total harmonic distortion (THD): <1% THD up to 123 dB SPL peak
Dynamic range: Typ. 100 dB
Max. SPL, peak before clipping: 134 dB
Output impedance: 30 - 40 Ohm
Cable drive capability: Up to 300 m (984 ft)
Power supply: For wireless systems: Min. 5 V – max. 50 V through DPA adapter; with DAD6001: 48 V phantom power ±4 V.
Connector: MicroDot
Weight: 7.5 g (0.26 oz) incl. cable and MicroDot connector
Microphone length: 12.7 mm (0.5 in)
Cable length: 3 m (9.4 ft)
Sensitivity selection tolerance (at 1 kHz): ± 1.5 dB

This product has not yet been rated, be the first to write a review!