FMK4071 Film Microphone Kit
This microphone kit is made for film or TV production where the microphone needs to be invisible.
The kit contains a d:screet™ SC4071 Miniature Microphone with our reinforced cable relief (pre-equalized for speech clarity) and various microphone concealment fixtures, specially designed to solve both hiding and clothing noise problems.
It is possible to use the SC4071 with most professional wireless system. The kit is delivered in a sturdy, hard case with a transparent lid leaving room for the connection adapter.
What is in the box
The DPA FMK4071 Film Microphone Kit contains:
1 x SC4071 Omnidirectional Mic, Presence Boost
10 x ADH0002 Double-sided Tape for Miniature Microphones Concealer
1 x ADH0004 Double-sided Mic Tape, 10 pcs.
1 x DMM0009 Miniature Concealer for 4071
1 x DUA0571 Windjammer for 4071, Grey Fur
1 x DUA0572 Miniature Mesh for 4071
|Principle of operation:||Pressure|
|Cartridge type:||Pre-polarized condenser element with vertical diaphragm|
|Frequency range, ± 2 dB:||100 Hz - 15 kHz with 5 dB soft boost at 4-6 kHz|
|Sensitivity, nominal, ±3 dB:||6 mV/Pa; -44.4 dB re. 1 V/Pa|
|Equivalent noise level A-weighted:||Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))|
|Equiv. noise level ITU-R BS.468-4:||Typ. 38 dB (max. 40 dB)|
|S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL):||Typ. 68 dB (A)|
|Total harmonic distortion (THD):||<1% up to 123 dB SPL peak;<1% up to 120 dB SPL sine|
|Dynamic range:||Typ. 97 dB|
|Max. SPL, peak before clipping:||144 dB|
|Output impedance:||30 - 40 Ohm|
|Cable drive compability:||Up to 300 m|
|Power supply:||For wireless systems: Min. 5 V – max. 50 V through DPA adapter; with DAD6001: 48 V phantom power ±4 V.|
|Weight:||9 g incl. cable and MicroDot connector|
|Capsule diameter:||5.4 mm|
|Microphone length:||17 mm|
|Cable length:||1.8 m (5.9 ft)|