Dedolight BLED2x1-BI-BAT 3 Light Kit - BICOLOR DC (BATTERY) (2x DLED / 1x Felloni)

Product Code: BLED2x1-BI-BAT
Condition: Used
  • Now £4,999.00
  • (£5,998.80 inc. VAT)
  • RRP £5,216.50
Item in Stock | Usually dispatched within 24 hours
Loading...

The Dedolight DLED4.1/Felloni 2x1 Bi-Color 3-Light Battery Kit offers a bi-color lighting solution with two DLED4.1 focusable LED lights and one Felloni LED light panel along with a Felloni softbox, a DP1.1 imager, two battery power supplies, three 95Wh batteries with integrated chargers and V-lock mounts, three DST stands, and a backpack. This combination features excellent color reproduction with the DLED4.1 and Felloni lights due to CRIs of >91 and 84 respectively. The DLED4.1 excels due to the ability to focus its beam from 60 to 4°, working in complement to the 50° output of the Felloni. They are both capable of producing a high output and their unique features provides you with a versatile setup.

Included:

 

2DLED4-BIdedolight focusing LED light head, bicolor
2DT4-BI-BAT-ABBattery power supply for DLED4 bicolor light heads (D-TAP)
2DPLSLight shield ring
2DBD8Standard barn door (eight leaves)
1DP1.1Imager projection attachment 
1DPGHSteel gobo holder (size 'M')
1GM-GMAS10-MGobo set (six popular steel gobos, size 'M')
2DFHGel filter holder
1DGWGel filter set, warm tone (fits Classic Series filter holder)
1DGMDGel filter set, mixed diffusion (fits Classic Series filter holder)
1DGCOLGel filter set, color effect (fits Classic Series filter holder)
1TP-DCOL-BI50HOFelloni dedocolor LED panel bicolor high output 50°
1TP-LONI-SBX42Felloni soft box with 2 barn doors and 2 diffusers
1TP-LONI-SBXGRID40Felloni textile grid for soft box, 40°
3LiTH-95SIBatteries with internal charger
3UKM-1283803Mains cable for LiTH
2DLBCA2-VBelt adapter for V-Mount batteries with holding plate for DT4.X-BAT/-BI-BAT power supplies. D-TAP power out socket
3DSTdedolight stands
1DH2Wall holder
1CLAMP1dedolight clamp
1DBPSLEDBackpack, small, with dividers for Felloni panel
  • Mobile DLED4.1-BI LED Light Head

    Having paved the way with the on-camera Ledzilla LED and the 1x1' stand-mounted Felloni Dedolight continues to forge ahead with the introduction of the Mobile Mobile DLED4.1-BI LED Light Head . Again using aspherical lens elements results in an impressive 1:20 flood to spot ratio with a beam angle of 4-60 degrees that delivers 18,360 Lux in spot mode @ 3.0' with no UV radiation emitted. A wide angle attachment increases coverage 54-85 degrees.

    Color balance, always a problem especially when working in mixed lighting, is no problem at all with the DLED4.1-BI. Set your color temperature to 3,200K or 5,600K or anywhere in between. The 5,600K setting is great outdoors or for use with HMI and flash sources. The 3,200K setting is perfect for areas with dominant ambient light emitted by architectural fixtures as well as night scenes involving candle light or fire light. As is characteristic of LED sources, the DLED4.1-BI generates negligible heat. The head is powered by the 100 to 260 VAC DT4.1-BI-BAT-XLR or the DT4.1-BI-BAT-AB. A full line of accessories from scrims and filters to Dedolight Imager projection attachments is available.

    Note: Requires purchase of power supply

    State-of-the-art LED light source with features exclusively developed by Dedolight
    The continuously variable 3,200 - 5,600 K LEDs make matching existing light sources a snap
    Dedolight patented aspherical optics
    Provides astoundingly high efficiency in output
    Unprecedented wider and tighter focusing range
    Dedolight clean beam concept. Controlled precision beam with no stray light outside the fixture and perfectly even light distribution within the beam
    Complete light-shaping control:
    Scrims, graduated gray filters, aspherical wide-angle attachments with rotating barndoor leaves
    Dedolight imager projection attachments for light framing, soft edge light framing with eye filters, gobo projection, background effect projection, slide projection
  • Felloni Tecpro 50 Degree High Output Bicolor LED Light

    LED light sources for image makers have been around for quite some time now, with everyone throwing their hat in the ring regarding on-camera versions and a few big players producing large free-standing panels. When uber-tech innovator, Academy Award winner Dedolight weighs in with a new panel, however, it tends to cause a stir.

    It's called the Felloni and was reportedly named by Dedolight founder Dedo Weigert, himself. Is it a play on Fellini, substituting the "o" from Dedo? Opinions vary but what doesn't is the buzz that this is an extraordinary light. Or should we say 30 lights? The lights are produced in 3 general categories, Standard (324 LEDs), High Output (576 LEDs) and Low Profile (324 LEDs). Within each of these categories are tungsten, daylight and bicolor iterations and within these sub-categories are 15°, 30° and 50° units. What they all have in common are claims of higher output with lower power consumption than competitors, a CRI of 84 and V-Mount and D-Tap battery interfaces. All versions come with a multi-voltage AC power supply, diffuser, metal filter holder strips and an 8' cable to dismount the on-board dimmer and turn it into a wired remote.

    This Dedolight Felloni Tecpro 50° High Output Bicolor LED Light runs on 576 LEDs and has a flood beam angle which makes gives lots of coverage at close range. Nearly doubling the amount of LEDs enables the Felloni to produce nearly double the output as compared to the Standard Version. The bicolor LEDs are variable in fine steps from 3200 - 5600K, covering the tungsten to daylight balance range. This is the perfect light when speedy setup is of paramount importance. You can forget about fumbling with gels and gaffer's tape and just start shooting. If you need a broad even light to establish a base light level on set, or require a fill light or light for a large subject, the Felloni Techpro 50° High Output is for you. The 1 x 1', 4.4 lb panel is virtually heat-free, so you can squeeze it into places where other lights just can't go without worrying about harming the talent. It's also rainproof and upgradable with the purchase of an LCD dimmer or DMX module. A wireless DMX module is in the works.

    More than 30% more light than competitors in this High Output version
    50% less power consumption than competitive products: 24 W instead of 50W
    Improved color rendition over competitive products: up to CRI 84 instead of 74
    Distance Diffuser reduces glare noticeably and provides identical light output with the diffuser on, to the Felloni's main competitive product without a diffuser. Bottom line: more power.
    AC adapter included
    Magnetic front frame for filter holder strips
    V-Mount and D-Tap battery interfaces
    Rainproof
    The standard (on board) dimmer module is detachable and attached to an 8' (2.5 m) cable, may be used as a remote wired hand dimmer.
    The Felloni can be upgraded with an LCD dimmer or DMX module. A wireless module is in the works and will afford dimming control over 512 channels.
  • Softbox for Felloni LED (15 x 15")

    Dedicated to Dedolight Felloni LED panels, this Softbox helps to soften and smooth the output for a more flattering light quality. It features a foldable design for easy storage and travel, and a removable front diffuser is included along with two removable side flags, which effectively serve as barndoors to control the beam spread.

  • Projection Attachment w/85mm f/2.8 Lens

    Used as a focusing snoot, the Dedolight Projection Attachment creates an area of light with either a soft or hard edge. It is supplied with an 85mm f/2.8 lens. An adjustable 18-leaf iris diaphragm, 60, 150 and 185mm lenses are also available separately.

    Offers great versatility with a spring-loaded accessory slot that accepts a wide variety of optional accessories
    An optional adjustable 18-leaf iris diaphragm allows the light to be focused in a tighter circle than is possible with the Projection Attachment alone.
    A slide holder which will hold conventionally mounted 35mm slides is available. This allows the slide to be projected onto a set or background. (A Heat Filter should be used to prolong the life of the slide.)
    An available gobo holder holds metal patterns or gobos that allow light to pass through, forming a pattern on a set or background.
  • DT4.1-BAT-AB DC Ballast for DLED4.1 Bicolor Lamp Head

    This Dedolight DT4.1-BAT-AB DC Ballast for DLED4.1 Bicolor Lamp Head is a dimmable ballast with a D-Tap connector that also provides continuous variable color temperature from 3,000 to 6,000K. Input is 10.2-18.0 VDC.

 

 

  • Mobile DLED4.1-BI LED Light Head
    Light SourceLED
    RatingNot specified by manufacturer
    Color Range3,200 - 5,600 K
    Focus Range4.0 - 60° (1:20), 54 - 85° with optional wide angle aspherical attachment
    Focus control: 1 complete turn
    Mount5/8" (16 mm)
    Operating PositionAny
    Tilt FunctionPermanent friction
    Photometrics 5,600K
    At 3.0' (1.0 m) Footcandle/Lux
    Flood: 109 / 1,170
    Medium: 217 / 2,340
    Spot: 655 / 7,050
    At 9.0' (2.75 m)
    Flood: 12 / 130
    Medium: 24 / 260
    Spot: 73 / 783
    At 15' (4.5 m)
    Flood: 4.3 / 47
    Medium: 9.0 / 94
    Spot: 26 / 282
    3,200K
    At 3.0' (1.0 m) Footcandle/Lux
    Flood: 71 / 760.5
    Medium: 141 / 1,521
    Spot: 425.7 / 4582.5
    At 9.0' (2.75 m)
    Flood: 7.8 / 84.5
    Medium: 15.6 / 169
    Spot: 47.5 / 509
    At 15' (4.5 m)
    Flood: 2.8 / 30.5
    Medium: 5.8 / 61
    Spot: 17 / 183
    Operating Voltage100 - 260 VAC 50/60 Hz via separate DT4.0-1BI or DT4.0-1BI-DMX
    10.2 - 18 VDC via DT4.0-1BI-BAT power supply
    Power Consumption47 W (via optional) AC power supply
    DimmingYes, 100 - 20%
    SafetyProtection Class III, SELV
    No UV radiation
    CoolingPassive (no fan)
    DimensionsHead in flood mode with folded yoke: 6.37 x 4.29 x 3.94" (16.2 x 11 x 10 cm)
    Head in spot mode with folded yoke: 7.87 x 4.29 x 3.94" (20 x 11 x 10 cm)
    Height with yoke extended: 7.24" (184 mm) Built-in accessory holder: 3.0" (7.6 cm) diameter
    Weight3.0 lb (1.36 kg)
    Packaging Info
    Box Dimensions (LxWxH)8.4 x 4.8 x 4.2"
  • Felloni Tecpro 50 Degree High Output Bicolor LED Light
    Light Source576 LEDs
    Color Range3200 - 5600K
    Operating VoltageAC: 100 - 240V AC, 50 / 60 Hz
    DC: 10 - 16.8V AC
    Power Consumption24 W
    Dimming100 - 0%
    Mount5/8" (16 mm)
    DimensionsHead only: 12 x 12 x 3" (30.4 x 30.4 x 7.6 cm)
    Head with yoke: 15 x 13.9 x 3" (38 x 35.2 x 7.6 cm)
    Weight4.4 lb (2.0 kg)
    With all accessories: 5.5 lb (2.5 kg)
    Packaging Info
    Box Dimensions (LxWxH)16.4 x 15.8 x 4.6"
  • Softbox for Felloni LED (15 x 15")
    Material of ConstructionSynthetic
    ShapeRectangle
    Compatibility1x Dedolight Felloni
    Removable Front FaceYes
    Removable Interior BaffleNo
    Accepts GridsYes
    Dimensions15 x 15" / 38.1 x 38.1 cm
    WeightNot specified by manufacturer
    Packaging Info
    Box Dimensions (LxWxH)16.5 x 8.1 x 2.6"
  • Projection Attachment w/85mm f/2.8 Lens
    Weight15.4 oz (437 g)
    Packaging Info
    Box Dimensions (LxWxH)8.0 x 5.3 x 5.0"
  • DT4.1-BAT-AB DC Ballast for DLED4.1 Bicolor Lamp Head
    Input10.2 to 18.0 VDC
    ConnectorD-Tap
    Dimming100-0%
    Color RangeContinuous: approximately 3,000 to 6,000K
    Dimensions5.59 x 2.83 x 1.96" (142 x 72 x 50 mm)
    Weight0.75 lb (340g)
    Packaging Info
    Box Dimensions (LxWxH)6.7 x 6.0 x 2.4"
Be the first to review Dedolight BLED2x1-BI-BAT 3 Light Kit - BICOLOR DC (BATTERY) (2x DLED / 1x Felloni). Write a review
Top