(0)
£0.00
Audio Technica PRO35 Cardioid condenser clip-on instrument microphone
  • Audio Technica PRO35 Cardioid condenser clip-on instrument microphone
  • Audio Technica PRO35 Cardioid condenser clip-on instrument microphone
  • Audio Technica PRO35 Cardioid condenser clip-on instrument microphone
  • Audio Technica PRO35 Cardioid condenser clip-on instrument microphone
  • Audio Technica PRO35 Cardioid condenser clip-on instrument microphone

Audio Technica PRO35 Cardioid condenser clip-on instrument microphone

Code:PRO35 Condition: New
£165.83
( £199.00 inc. VAT)
Item in Stock  |  Usually dispatched within 24 hours
Add to Bag
This product has been added to your basket...
  • Continue Shopping
  • Checkout

PRO35

it folds to your needs

Designed for saxophone, brass and percussion, the PRO35 is ideal in applications with high sound pressure levels, and for stage performances. It comes equipped with the UniMount® clamp, which allows for precise positioning, better impact resistance, and a good protection of the capsule.

  • Ideal microphone for sax, toms, brass and percussion
  • Cardioid polar pattern improves isolation of desired sound source and reduces the pickup of sounds to the sides and rear
  • Perfect for non-static stage performances
  • Extended frequency response renders all the subtle nuances of a performance
  • 80Hz low-cut filter on the power module
  • UniMount® clip allows for precise positioning, providing impact resistance and protecting the capsule
  • Gold plated corrosion-resistant contacts on the XLRM-type connectors
  • Excels in applications with high sound pressure level
 

“Extended frequency response”

The PRO35 has a dynamic range of 115 dB, a maximum SPL of 145 dB level and frequency response extends from 50 Hz to 15 kHz.

“Unimount® clip system”

The PRO35's UniMount® clip allows for accurate positioning, providing shock and vibration resistance whilst protecting the element.

“LOW-cut filter”

The AT8538 power module is equipped with a low-cut filter that removes frequencies below 80 Hz. This ensures the maximal removal of noise pollution (ground vibration of the instrument, or electric humming or other various buzzing), without altering the quality of the instrument sound capture.

  • Designed for sax, toms, brass and percussion
  • Ideal for active stage performances
  • UniMount® clip permits accurate positioning
  • Cardioid polar pattern reduces pickup of sounds from the sides and rear
  • Ideal microphone for sax, toms, brass and percussion
  • Cardioid polar pattern improves isolation of desired sound source and reduces pickup of sound to the sides and rear
  • Perfect for non-static stage performances
  • Extended frequency response renders all the subtle nuances of a performance
  • UniMount® clip allows precise positioning, providing impact resistance and protecting the capsule
  • Gold plated contacts on XLRM-type connectors, corrosion-resistant
Element Fixed-charge back plate, permanently polarized condenser
Polar Pattern Cardioid
Frequency Response 50 - 15,000 Hz
Open Circuit Sensitivity -45 dB (5.6 mV) re 1V at 1 Pa
Impedance 250 ohms
Maximum Input Sound Level 145 dB SPL, 1 kHz at 1% T.H.D.
Low Frequency Roll Off 80 Hz, 18 dB/octave
Switches Flat, roll-off
Dynamic Range 115 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 64 dB, 1 kHz at 1 Pa
Phantom Power Requirements 11-52V DC, 2 mA typical
Cable 6.0' (1.8 m) long (permanently attached to microphone), 0.10" (2.6 mm) diameter, 2-conductor, shielded cable with TA3F-type connector
Accessories Included AT8418 UniMount® microphone instrument mount; AT8538 power module; soft protective pouch

This product has not yet been rated, be the first to write a review!