Warning : the BP893c comes unterminated without a power supply.
With its ergonomically molded earpiece and unobtrusive one-inch boom, Audio-Technica’s BP893 MicroEarset offers inconspicuous placement along with clear, natural vocal pickup. Its lightweight low-profile design makes the microphone ideal for use in theatrical performances, houses of worship and broadcast studios.
The BP893 MicroEarset is positioned unobtrusively over the ear. Its omnidirectional miniature condenser capsule offers outstanding pickup tailored for natural vocal reproduction, with audio reproduction similar to that of a high-quality lavalier microphone. The microphone is also ideal for use in violin pickup; wear the BP893 over the ear as usual, with no need for clamps on the violin.
With its ultra light weight of 2g and a capsule diameter of 2.6mm, the BP893c ear-worn microphone is one of the lightest and most discreet microphones of its type on the professional audio market. It sits comfortably on the earlobe, and the extremely unobtrusive one-inch flexible boom sits discreetly over the face, with the 2.6mm pinhead capsule at the end.
The omnidirectional electret capsule provides a clear and natural voice reproduction, similar to that of a high-quality lavalier microphone. Its sleek design makes it ideal for use in theatre, places of worship and broadcast studios.
Parylene is a transparent semi crystalline polymer film, recognized for its thermodynamic stability, high resistance to solvents and low permeability. The BP893c is therefore easy to clean, and the acidity of the skin will not alter its appearance.
|Element||Fixed-charge back plate, permanently polarised condenser|
|Frequency Response||20 - 20,000 Hz|
|Open Circuit Sensitivity||-34 dB (19.9 mV) re 1V at 1 Pa|
|Maximum Input Sound Level||114 dB SPL, 1 kHz at 3% T.H.D.|
|Signal-to-Noise Ratio||68 dB, 1 kHz at 1 Pa|
|Weight||Microphone, boom & earpiece: 2 g|
|Dimensions||Microphone: 8.1 mm (0.32") long, 2.6 mm (0.10") diameter |
Boom: 26.4 mm (1.04") long, 1.07 mm (0.04") diameter
|Cable||1.4 m (55") long (permanently attached to microphone), 1.6 mm (0.06") diameter, 2-conductor shielded unterminated cable without connector|
|Accessories Included||AT8464 dual-ear microphone mount; AT8440 cable clip; two AT8157 windscreens; two AT8156 element covers; moisture guard; belt clip ; carrying case|