(0)
£0.00
Audio Technica BP4071 Line & gradient condenser microphone, 395mm long

Audio Technica BP4071 Line & gradient condenser microphone, 395mm long

Code:BP4071 Condition: New
£741.67
( £890.00 inc. VAT)
Item in Stock  |  Usually dispatched within 24 hours
Add to Bag
This product has been added to your basket...
  • Continue Shopping
  • Checkout

BP4071 Line & gradient condenser microphone, 395mm long

With directivity equal to mics up to 50% longer, the BP4071 has been specially created to meet the pickup demands of broadcasting, film/TV sound, professional recording, wildlife recording and theater sound reinforcement. Particularly useful for miking dynamic action in film/TV audio as well as in 'spot' miking techniques in the music studio or theater, the 15.55"-long BP4071 provides a low noise floor and direct-coupled, balanced output for a clean signal even in high-output conditions. Audio-Technica has pioneered an interference tube design in the BP4071 that provides the same directivity as mics up to 50 percent longer.

 

Designed for use in broadcasting, film/TV production, and theater sound reinforcement applications

Direct-coupled, balanced output ensures a clean signal even in high-output conditions

Innovative acoustic design provides same directivity as mics up to 50% longer

Rugged housing made of lightweight structural-grade aluminum alloy

Transformerless design for improved pickup of transients

Switchable 80 Hz high-pass filter & 10 dB pad

 

RoHS-compliant - free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS)

Element: Externally polarized (DC bias) capacitor

Polar Pattern: Line + gradient

Frequency Response: 20-20,000 Hz

Low Frequency Roll Off: 80 Hz, 12 dB/octave

Open Circuit Sensitivity: -29 dB (35.5 mV) re 1V at 1 Pa

Impedance: 50 ohms

Maximum Input Sound Level: 141 dB SPL, 1 kHz at 1% T.H.D.; 151 dB SPL, with 10 dB pad (nominal)

Dynamic Range: 128 dB, 1 kHz at Max SPL

Signal to Noise Ratio: 81 dB, 1 kHz at 1 Pa

Phantom Power Requiremens: 48V DC, 4.8 mA typical

Weight: 136 g (4.8 oz)

Dimensions: 395.0 mm (15.55") long, 21.0 mm (0.83") maximum body diameter

Output Connector: Integral 3-pin XLRM-type

Accessories: AT8405a stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; AT8145 windscreen; two O-Rings; protective carrying case

This product has not yet been rated, be the first to write a review!