Based on models originally developed for use in the broadcast of the Sydney Games in 2000, the BP4027 (14.96" long) and BP4029 (9.29" long) Stereo Shotgun models are engineered for high-end broadcast and production use. Both microphones feature independent line-cardioid and figure-of-eight elements configured in an MS (Mid-Side) arrangement with switch-selectable internal matrixing. These innovative microphones allow sound recordists the choice of selecting a left-right stereo output (wide or narrow) via the microphone’s internal matrixing system or choosing discrete Mid-Side signals for later manipulation, a flexibility not available from any other manufacturer.
A switchable low frequency roll-off filter helps minimize the pickup of unwanted low frequency noise. These phantom-powered models feature a rugged lightweight design and sleek black color scheme, perfect for on-camera use.
The BP4027 is equipped with two independent electret capsules, one configured as narrow cardioid and the other configured in figure of eight MS mode (central-lateral) with provision for adjusting the width of the stereo image in postproduction or outside by means of a matrix mixer.
With the BP4027 you can choose between a wide sound recording angle (LR-W) - whereby the microphone captures more ambient noise, or a narrow sound recording angle (LR-N) where the rejection is greater and ambient noises are mitigated.
The BP4027 is manufactured from a lightweight but very sturdy aluminum, which can be heavily used in harsh environments. Its length is 380mm and it weighs 142g, making it ideal for installing on a boom. If its size were to be troublesome on certain cameras, it can also be used on a stand to capture distant sound sources.
|Element||Fixed-charge back plate, permanently polarized condenser|
|Polar Pattern||Line-cardioid, Figure-of-eight|
|Frequency Response||30-20,000 Hz|
|Open Circuit Sensitivity||Mid: -30 dB (31.6 mV) re 1V at 1 Pa;
Side: -34 dB (19.9 mV) re 1V at 1 Pa;
LR Stereo: -36 dB (15.8 mV) re 1V at 1 Pa
|Maximum Input Sound Level||Mid: 123 dB SPL, 1 kHz at 1% T.H.D.;
Side: 127 dB SPL, 1 kHz at 1% T.H.D.;
LR Stereo: 126 dB SPL, 1 kHz at 1% T.H.D.
|Low Frequency Roll Off||80 Hz, 12 dB/octave|
|Switches||M-S, LR Stereo-Wide (LR-W), LR Stereo-Narrow (LR-N);
|Dynamic Range||Mid: 101 dB, 1 kHz at Max SPL;
Side: 101 dB, 1 kHz at Max SPL;
LR Stereo: 102 dB, 1 kHz at Max SPL
|Signal-to-Noise Ratio||Mid: 72 dB SPL, 1 kHz at 1 Pa;
Side: 68 dB SPL, 1 kHz at 1 Pa;
LR Stereo: 70 dB SPL, 1 kHz at 1 Pa
|Phantom Power Requirements||11-52V DC, 4 mA typical at 48V, each channel|
|Weight||142 g (5.0 oz)|
|Dimensions||380.0 mm (14.96") long, 21.0 mm (0.83") diameter|
|Output Connector||Integral XLR5M-type|
|Cable||Dual 0.61 m (24") shielded two-conductor, terminated in two XLR3M-type connectors|
|Accessories Included||AT8405a stand clamp for 5/8"-27 threaded stands; AT8135 foam windscreen; 5/8"-27 to 3/8"-16 threaded adapter; protective carrying case|
This product has not yet been rated, be the first to write a review!