(0)
£0.00
Audio Technica ATCS-A60 IR transmitter / receiver unit
  • Audio Technica ATCS-A60 IR transmitter / receiver unit
  • Audio Technica ATCS-A60 IR transmitter / receiver unit

Audio Technica ATCS-A60 IR transmitter / receiver unit

Code:ATCS-A60 Condition: New
£600.00
( £720.00 inc. VAT)
Item in Stock  |  Usually dispatched within 24 hours
Add to Bag
This product has been added to your basket...
  • Continue Shopping
  • Checkout

ATCS-A60

antenna for secure transmission and receipt

In the digital era, the safeguarding of information is paramount. With the Audio-Technica infrared conference system your wireless signal will not leave the room; it is impossible to capture the broadcast from another building, for example. Compared to a UHF system that uses radio waves, which behave the same way as a radio station, transmitting over a broad area, the infrared system excels at protecting your information, as no leakage is possible.

The antenna of the transmitter / receiver is mounted on the ceiling or on the wall, using a coaxial connection cable BNC 75 ohm to the central control unit. The automatic gain during use makes the ATCS-A60 one of the best performing systems on the infrared market.

  • Bespoke antenna for the Audio-Technica ATCS-60 infrared conferencing system
  • Ability to activate automatically upon microphone detecting a voice
  • Installs onto a ceiling or wall, with support included as standard
  • The antenna connects to and is powered by a 75-ohm BNC coaxial cable (not included) that connects it to the ATCS-C60 control unit
  • The scope of infrared rays is 5m
  • An LED indicates the unit is in use
  • The angle of transmission / reception is approximately 120 °
 

“SECURE YOUR INFORMATION”

By its nature, infrared technology is secure and is guaranteed to keep you and your information in the conference room only. No information can be received outside of the room.

“SELF-POWERED Antenna”

The ATCS-A60 infrared antenna is fed by a 24 volt DC, supplied by the central control unit to which it is connected via a BNC 75 Ohm coaxial cable. Using a 5C2V or higher spec cable is required.

“system flexibility”

The ATCS-A60 antennas can be installed and taken down very simply and quickly, without the inconvenience of visible wires and long installation times. It is the ideal choice for use in versatile environments.

  • Bespoke infrared antenna for the ATCS-60 conference system
  • Transmits and receives infrared rays
  • Installs on ceilings or walls
  • Connects via a 75Ω BNC coaxial cable to the central control unit
  • Automatic gain gives better IR performance
  • LED power indicator
  • Antenna dedicated to Audio-Technica's ATCS-60 infrared conference system
  • Powered by a BNC 75 ohm coaxial cable (not included) which connects it to the ATCS-C60 central control unit
  • The scope of infrared rays is 5m
  • The angle of transmission / reception is approximately 120 °
  • External dimensions Ø 108mm x 55.5mm (H)
  • Supplied with a mounting bracket and 2 screws
Overall System
Operating Frequencies Infrared
Number Of Channels Voice: 5 channels
Monitor: 4 channels
Data: 2 channels
Antenna & Distribution
Operating Bandwidth 1 - 10 MHz
Connections BNC Terminal (75 ohms) x1
Power Supply 24 V DC (provided by ATCS-C60)
Dimensions ∅ 108 mm, 55.5 mm depth
Weight 151 g
Accessories Installation bracket x1; Fixation screws x2
Infrared
Bandwidth 1 - 10 MHz
Modulation Method FM Modulation
Data Communication 9,600 bps

This product has not yet been rated, be the first to write a review!