(0)
£0.00
Audio Technica AT898 Subminiature cardioid condenser microphone

Audio Technica AT898 Subminiature cardioid condenser microphone

Code:AT898 Condition: New
£232.50
( £279.00 inc. VAT)
Item in Stock  |  Usually dispatched within 24 hours
Add to Bag
This product has been added to your basket...
  • Continue Shopping
  • Checkout

AT898 Subminiature cardioid condenser microphone

Designed to be worn as a lavalier or hidden in clothing, Audio-Technica's discreet-design cardioid AT898 offers maximum intelligibility, accurate voice reproduction and unobtrusive appearance for use in houses of worship, broadcast studios, theaters, etc. Its switchable low-frequency roll-off reduces sensitivity to popping. Battery or phantom power.

Maximum intelligibility and clean, accurate reproduction for lecturers, stage and television talent, and houses of worship

Low-profile design (a mere 5 mm in diameter) is ideal for applications requiring minimum visibility

Operates on battery or phantom power

Extensive array of provided accessories includes a clothing clip, viper clip, magnet clip and lanyard (black models only), windscreens, interchangeable single and double mic holders

Accessories available separately

9.8' (3.0 m) cable permanently attached to mic, TA3F connector at power module

RoHS compliant - free from all substances specified in the EU directive on hazardous substances

 

Also available as: AT898c - less power module; 55" (1.4 m) cable, unterminated AT898cL4 - less power module; 55" (1.4 m) cable terminated with Lemo connector for Sennheiser SK wireless systems AT898cT4 - less power module; 55" (1.4 m) cable terminated with TA4F connector for Shure wireless systems AT898cT5 - less power module; 55" (1.4 m) cable terminated with TA5F connector for ATW-U101 body-pack wireless system AT898cW - less power module; 55" (1.4 m) cable terminated with locking 4-pin connector for A-T UniPak™ wireless systems

Element: Fixed-charge back plate, permanently polarized condenser

Polar Pattern: Cardioid

Frequency Response: 200-15,000 Hz

Low Frequency Roll Off: 80 Hz, 12 dB/octave

Open Circuit Sensitivity: Phantom: -43 dB (7.0 mV) re 1V at 1 Pa Battery: -46 dB (5.0 mV) re 1V at 1 Pa

Impedance: Phantom: 200 ohms Battery: 250 ohms

Maximum Input Sound Level: Phantom: 131 dB SPL, 1 kHz at 1% T.H.D. Battery: 115 dB SPL, 1 kHz at 1% T.H.D.

Dynamic Range: Phantom: 100 dB, 1 kHz at Max SPL Battery: 84 dB, 1 kHz at Max SPL

Signal to Noise Ratio: 63 dB, 1 kHz at 1 Pa

Phantom Power Requiremens: 11-52V DC, 2 mA typical

Battery Type: 1.5V AA/UM3

Battery Current Life: 0.4 mA / 1200 hours typical (alkaline)

Switch: Flat, roll-off (recessed)

Cable: 9.8' (3.0 m) long (permanently attached to microphone), 0.08" (2.0 mm) diameter, 2-conductor, shielded cable with TA3F output connector that mates with TB3M jack on power module

Accessories: AT8537 power module; AT8439 cable clip; clothing clip base; viper clip base; magnet clip base and plate with lanyard; three single mic holders; two double mic holders; two windscreens; battery; protective carrying case

This product has not yet been rated, be the first to write a review!