(0)
£0.00
Audio Technica AT875R 178mm line & gradient condenser microphone
  • Audio Technica AT875R 178mm line & gradient condenser microphone
  • Audio Technica AT875R 178mm line & gradient condenser microphone
  • Audio Technica AT875R 178mm line & gradient condenser microphone
  • Audio Technica AT875R 178mm line & gradient condenser microphone

Audio Technica AT875R 178mm line & gradient condenser microphone

Code:AT875R Condition: New
£115.83
( £139.00 inc. VAT)
Item in Stock  |  Usually dispatched within 24 hours
Add to Bag
This product has been added to your basket...
  • Continue Shopping
  • Checkout

AT875R

the shortest and lightest robust shotgun microphone

Audio-Technica's AT875R is designed for video production and broadcast (ENG/EFP) audio acquisition. Audio-Technica's shortest shotgun microphone, it mounts conveniently on a DV camcorder without adding noticeable heft, and is ideal for use with compact digital cameras. This high-performance microphone offers a narrow acceptance angle of line + gradient design. It also features smooth, natural-sounding on-axis audio quality and excellent off-axis rejection of sound arriving from the sides and rear of mic.

  • Extremely short in length (under 7"/175mm) ideal for use with compact digital cameras and broadcast (ENG/EFP) audio acquisition
  • Provides the narrow acceptance angle desirable for long-distance sound pickup
  • Ideal for mobile applications and corporate reports
  • Very light, it is easily mounted on a compact camera or digital video camera equipped with an XLR input with phantom power or when connected to a microphone preamp or recorder that can supply the microphone
  • Excellent sound rejection from the sides and rear of mic
  • Very balanced frequency response with a slight bump at 5 kHz
  • Tailored response minimizes camera and handling noise
  • Operates on phantom power only
  • Comes with a foam windscreen, a stand clamp, two O-rings and a soft carry case
 

“small but robust”

The AT875R weighs only 80g, and at a length of 175mm, it is one of the shortest shotgun microphones on the market with professional sound quality. Made from metal, its inherent robustness allows it to follow you on the ground.

“ideal for use on booms”

As boom operators are well aware, the weight of a microphone is paramount. The AT875R is the most affordable universal solution. Equipped with its own clamp with screw thread adaptor, it intalls very quickly on a boom or on a microphone stand, and at 80g you would almost forget it was there!

“excellent off-axis rejection”

The very thin shape provides a narrow acceptance angle of 60°, while maintaining excellent rejection of off-axis noise. The AT875R guarantees you precise audio capture with great intelligibility.

  • Designed for video production and broadcast (ENG/EFP) audio acquisition
  • Extremely short length (under 7") ideal for use with compact digital camera
  • Tailored response minimizes camera and handling noise
  • Provides the narrow acceptance angle desirable for long-distance pickup
  • Excellent sound rejection from the sides and rear of mic
  • Operates on phantom power only
  • Designed for video production and broadcast (ENG/EFP) audio acquisition
  • Extremely short length (under 7") ideal for use with compact digital cameras
  • Provides the narrow acceptance angle desirable for long-distance sound pickup
  • Ideal for mobile applications and corporate reports
  • Excellent sound rejection from the sides and rear of mic
  • Tailored response minimizes camera and handling noise
  • Operates on phantom power only
  • Comes with a foam windscreen
Element Fixed-charge back plate, permanently polarized condenser
Polar Pattern Line + gradient
Frequency Response 90-20,000 hz
Open Circuit Sensitivity -30dB (31.6mV), re 1V at 1 Pa
Impedance 100 ohms
Maximum Input Sound Level 127 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range 107 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 74 dB, 1 kHz at 1 Pa
Phantom Power Requirements 11-52V DC, 2 mA typical
Weight 80 g
Dimensions 175.0 mm (6.89") long, 21.0 mm (0.83") diameter
Output Connector Integral 3-pin XLRM-type
Accessories Included AT8405a stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; windscreen; soft protective case

This product has not yet been rated, be the first to write a review!