(0)
£0.00
Audio Technica AT8035 369mm line & gradient condenser microphone

Audio Technica AT8035 369mm line & gradient condenser microphone

Code:AT8035 Condition: New
£241.67
( £290.00 inc. VAT)
Item in Stock  |  Usually dispatched within 24 hours
Add to Bag
This product has been added to your basket...
  • Continue Shopping
  • Checkout

AT8035 369mm line & gradient condenser microphone

The length (14.53") of the AT8035 Line + Gradient Condenser Microphone is well-suited for ENG, outdoor recording and other specialized uses. The microphone is designed for video production and broadcast (ENG/EFP) audio acquisition. Suited for both boom & handheld use, it provides the narrow acceptance angle desirable for long-distance sound pickup, featuring excellent sound rejection from the sides and rear of mic and switchable low-frequency roll-off. It operates on battery or phantom power.

 

Designed for video production and broadcast (ENG/EFP) audio acquisition

Length is well-suited for ENG, outdoor recording and other specialized uses

Provides the narrow acceptance angle desirable for long-distance sound pickup

Excellent sound rejection from the sides and rear of mic

Switchable low-frequency roll-off

Operates on battery or phantom power

 

RoHS compliant - free from all substances specified in the EU directive on hazardous substances

Element: Fixed-charge back plate, permanently polarized condenser

Polar Pattern: Line + gradient

Frequency Response: 40-20,000 Hz

Low Frequency Roll Off: 80 Hz, 12 dB/octave

Open Circuit Sensitivity: Phantom: -38 dB (12.5 mV) re 1V at 1 Pa Battery: 39 dB (11.2 mV) re 1V at 1 Pa

Impedance: Phantom: 250 ohms Battery: 300 ohms

Maximum Input Sound Level: Phantom: 132 dB SPL, 1 kHz at 1% T.H.D. Battery: 120 dB SPL, 1 kHz at 1% T.H.D.

Dynamic Range: Phantom: 110 dB, 1 kHz at Max SPL Battery: 98 dB, 1 kHz at Max SPL

Signal to Noise Ratio: 72 dB, 1 kHz at 1 Pa

Phantom Power Requiremens: 11-52V DC, 2 mA typical

Battery Type: 1.5V AA/UM3

Battery Current Life: 0.4 mA / 1200 hours typical (alkaline)

Switch: Flat, roll-off

Weight: 170 g (6.0 oz)

Dimensions: 369.0 mm (14.53") long, 21.0 mm (0.83") diameter

Output Connector: Integral 3-pin XLRM-type

Accessories: AT8405a stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; AT8132 windscreen; battery; protective carrying case

This product has not yet been rated, be the first to write a review!