(0)
£0.00
Audio Technica AT8031 Cardioid condenser handheld microphone

Audio Technica AT8031 Cardioid condenser handheld microphone

Code:AT8031 Condition: New
£145.83
( £175.00 inc. VAT)
Item in Stock  |  Usually dispatched within 24 hours
Add to Bag
This product has been added to your basket...
  • Continue Shopping
  • Checkout

AT8031

Cardioid Condenser Handheld Microphone

The AT8031 is ideal for close-up interviews, vocals, overheads, piano, and strings. Its cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source. The mic’s proximity effect provides added warmth when used close up. Features include a large protective screen that reduces "popping" and sibilant distortion. It operates on battery or phantom power.

  • Ideal for close-up vocals, overheads, piano and strings
  • Low-mass diaphragm ensures minimum distortion
  • Cardioid pattern provides added warmth when used close up
  • Operates on battery or phantom power
  • Ideal for close-up vocals, overheads, piano and strings
  • Low-mass diaphragm ensures minimum distortion
  • Cardioid pattern provides added warmth when used close up
  • Large protective screen that reduces 'popping' and sibilant distortion
  • Operates on battery or phantom power
Element Fixed-charge back plate permanently polarized condenser
Polar Pattern Cardioid
Frequency Response 30 - 20.000 Hz
Open Circuit Sensitivity Phantom: -44 dB (6.3 mV) re 1V at 1 Pa ;
Battery: -45 dB (5.6 mV) re 1V at 1 Pa
Impedance Phantom: 250 ohms
Battery: 300 ohms
Maximum Input Sound Level Phantom: 137 dB SPL, 1 kHz at 1% T.H.D.
Battery: 123 dB SPL, 1 kHz at 1% T.H.D.
Low Frequency Roll Off 80 Hz, 18 dB/Octave
Switches Flat, roll-off
Dynamic Range Phantom: 113 dB, 1 kHz at Max SPL
Battery: 99 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 70 dB, 1 kHz at 1 Pa
Phantom Power Requirements 11-52V DC, 2 mA typical
Battery Type 1.5V AA/UM3
Battery Current/Life 0.4 mA / 1200 hours typical (alkaline)
Weight 205 g (7.2 oz)
Dimensions 193.0 mm (7.60") long, 50.3 mm (1.98") head diameter
Output Connector Integral 3-pin XLRM-type
Accessories Included AT8405a stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; AT8114 windscreen; battery; soft protective pouch

This product has not yet been rated, be the first to write a review!