Available as a single mic or a stereo pair, the AT5045 offers the sound and performace of a large diagphram studio condenser microphone, in a small and easy to position stick type body. Despite its small size, the AT5045 has Audio-Technica's largest single diaphragm, larger than most large diaphragm condenser microphones on the market.
The AT5045 is presented in a convenient stick design body, meaning you can easily position it in places that are not possible with other large diaphragm condenser microphones, making it a very versatile microphone.
The AT5045 uses Audio-Technica's largest single element, larger than that of most on the market, offering a pure and accurate sound reproduction that is perfectly suited to acoustic instruments.
Discrete components have been chosen to complete the circuitry, honing down to the very essentials, allowing optimized capsule performance and an unpresidented dynamic range.
|Element||Fixed-charge back plate, permanently polarized condenser|
|Frequency Response||20 - 20,000 Hz|
|Open Circuit Sensitivity||-35 dB (17.7 mV) re 1V at 1 Pa*|
|Maximum Input Sound Level||149 dB SPL, 1 kHz at 1% T.H.D.|
|Noise||8 dB SPL|
|Dynamic Range||141 dB, 1 kHz at Max SPL|
|Signal-to-Noise Ratio||86 dB, 1 kHz at 1 Pa*|
|Phantom Power Requirements||48V DC, 1.4 mA typical|
|Dimensions||177 mm long, 25.0 mm maximum body diameter|
|Output Connector||Integral 3-pin XLRM-type|
|Accessories Included||AT8481 isolation clamp for 5/8"-27 threaded stands; AT8165 windscreen; protective carrying case|