(0)
£0.00
Audio Technica AT4900B-48 Microphone body for AT4049b-ELE, AT4051b-ELE, AT4053b-ELE

Audio Technica AT4900B-48 Microphone body for AT4049b-ELE, AT4051b-ELE, AT4053b-ELE

Code:AT4900B-48 Condition: New
£232.50
( £279.00 inc. VAT)
Item in Stock  |  Usually dispatched within 24 hours
Add to Bag
This product has been added to your basket...
  • Continue Shopping
  • Checkout

AT4900b-48

Electronic / body only

This versatile modular microphones may be used with confidence in a wide variety of professional miking applications. Featuring direct-coupled balanced outputs for clean signals in high-output conditions, the microphone is totally free of the distortion associated with conventional transformer-coupled outputs. And its fast response to transients contributes to the open, transparent reproduction of even the most difficult-to- capture instruments.

The AT4900b-48 is a body only. You need to choose interchangeable capsule available in cardioid (AT4051b-EL), omni (AT4049b-EL) and hypercardioid (AT4053b-EL).

  • Specially engineered to meet the most critical acoustic requirements of professional recording, broadcast and sound reinforcement
  • Omnidirectional polar pattern provides maximum ambient pickup
  • Direct-coupled, balanced output results in a clean signal even under high-output conditions
  • Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
  • Switchable 80 Hz hi-pass filter and 10 dB pad
  • Rugged turned-brass microphone housing for enduring dependability
  • State-of-the-art design and manufacturing techniques ensure compliance with Audio-Technica's stringent consistency and reliability standards

AT4900b-48

Electronic / body only

  • Specially engineered to meet the most critical acoustic requirements
  • Direct-coupled, balanced output results in a clean signal
  • Need head capsule sold separately (AT4049b-EL, AT4051b-EL or AT4053b-EL)
  • Transformerless circuitry virtually eliminates low-frequency distortion
  • Switchable 80 Hz hi-pass filter and 10 dB pad
  • Rugged turned-brass microphone housing for enduring dependability
Element Externally polarized (DC bias) condenser
Low Frequency Roll Off 80 Hz, 18 dB/octave
Switches Flat, roll-off; 10 dB pad (nominal)
Phantom Power Requirements 48V DC, 4.8 mA typical
Weight 130g
Dimensions 155.0 mm (6.10") long, 21.0 mm (0.83") maximum body diameter
Output Connector Integral 3-pin XLRM-type
Accessories Included AT8405a stand clamp for 5/8"-27 threaded stands; windscreen; protective carrying case

This product has not yet been rated, be the first to write a review!