Audio Technica AT4053B Hypercardioid condenser pencil microphone

Product Code: AT4053B
Condition: Used
  • Now £370.00
  • (£444.00 inc. VAT)
  • RRP £434.17
Item in Stock | Usually dispatched within 24 hours
Loading...

AT4053b

Hypercardioid Condenser Modular Microphone

This versatile studio performer may be used with confidence in a wide variety of professional miking applications. Featuring direct-coupled balanced outputs for clean signals in high-output conditions, the AT4053b is totally free of the distortion associated with conventional transformer-coupled outputs. And its fast response to transients contributes to the open, transparent reproduction of even the most difficult-to-capture instruments. 

The AT4053b consists of two modular subassemblies: an AT4900b-48 body and an AT4053b-EL hypercardioid head capsule (both available separately). Additional interchangeable capsules are available in omnidirectional (AT4049b-EL) and cardioid (AT4051b-EL).

  • Specially engineered to meet the most critical acoustic requirements of professional recording, broadcast and sound reinforcement
  • Hypercardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
  • Direct-coupled, balanced output results in a clean signal even under high-output conditions
  • Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
  • Switchable 80 Hz hi-pass filter and 10 dB pad
  • Rugged turned-brass microphone housing for enduring dependability
  • State-of-the-art design and manufacturing techniques ensure compliance with Audio-Technica's stringent consistency and reliability standards

AT4053b

Hypercardioid Condenser Modular Microphone

  • Meet the most critical acoustic requirements of professional recording
  • Featuring direct-coupled balanced outputs
  • Omni and cardioid head capsules are available separately
  • Transformerless circuitry virtually eliminates low-frequency distortion
  • Switchable 80 Hz hi-pass filter and 10 dB pad
  • Rugged turned-brass microphone housing for enduring dependability
ElementExternally polarized (DC bias) capacitor
Polar PatternHypercardioid
Frequency Response20 - 20.000 Hz
Open Circuit Sensitivity-34 dB (19.9 mV) re 1V at 1 Pa
Impedance50 ohms
Maximum Input Sound Level145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal)
Low Frequency Roll Off80 Hz, 18 dB/octave
SwitchesFlat, roll-off; 10 dB pad (nominal)
Dynamic Range129 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio78 dB, 1 kHz at 1 Pa
Phantom Power Requirements48V DC, 4.8 mA typical
Weight127g
Dimensions155.0 mm (6.10") long, 21.0 mm (0.83") maximum body diameter
Output ConnectorIntegral 3-pin XLRM-type
Accessories IncludedAT8405a stand clamp for 5/8"-27 threaded stands; windscreen; protective carrying case
Be the first to review Audio Technica AT4053B Hypercardioid condenser pencil microphone. Write a review
Top