(0)
£0.00
Audio Technica AT4051B Cardioid condenser pencil microphone
  • Audio Technica AT4051B Cardioid condenser pencil microphone
  • Audio Technica AT4051B Cardioid condenser pencil microphone
  • Audio Technica AT4051B Cardioid condenser pencil microphone
  • Audio Technica AT4051B Cardioid condenser pencil microphone

Audio Technica AT4051B Cardioid condenser pencil microphone

Code:AT4051B Condition: New
£365.83
( £439.00 inc. VAT)
Item in Stock  |  Usually dispatched within 24 hours
Add to Bag
This product has been added to your basket...
  • Continue Shopping
  • Checkout

AT4051b

Cardioid Condenser Modular Microphone

This versatile modular microphones may be used with confidence in a wide variety of professional miking applications. Featuring direct-coupled balanced outputs for clean signals in high-output conditions, the AT4051b is totally free of the distortion associated with conventional transformer-coupled outputs. And its fast response to transients contributes to the open, transparent reproduction of even the most difficult-to- capture instruments.

The AT4051b consists of two modular subassemblies: an AT4900b-48 body and an AT4051b-EL cardioid head capsule (both available separately). Additional interchangeable capsules are available in omnidirectional (AT4049b-EL) and hypercardioid (AT4053b-EL).

  • Specially engineered to meet the most critical acoustic requirements of professional recording, broadcast and sound reinforcement
  • High front-to-back rejection ratio cardioid polar pattern improves isolation of desired sound source
  • Direct-coupled, balanced output results in a clean signal even under high-output conditions
  • Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
  • Switchable 80 Hz hi-pass filter and 10 dB pad
  • Rugged turned-brass microphone housing for enduring dependability
  • State-of-the-art design and manufacturing techniques ensure compliance with Audio-Technica's stringent consistency and reliability standards

AT4051b

Cardioid Condenser Modular Microphone

  • Meet the most critical acoustic requirements of professional recording
  • High front-to-back rejection ratio cardioid polar pattern
  • Omni and Hypercardioid head capsules are available separately
  • Transformerless circuitry virtually eliminates low-frequency distortion
  • Switchable 80 Hz hi-pass filter and 10 dB pad
  • Rugged turned-brass microphone housing for enduring dependability
Element Externally polarized (DC bias) capacitor
Polar Pattern Cardioid
Frequency Response 20 - 20.000 Hz
Open Circuit Sensitivity -34 dB (19.9 mV) re 1V at 1 Pa
Impedance 50 ohms
Maximum Input Sound Level 145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal)
Low Frequency Roll Off 80 Hz, 18 dB/octave
Switches Flat, roll-off; 10 dB pad (nominal)
Dynamic Range 129 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 78 dB, 1 kHz at 1 Pa
Phantom Power Requirements 48V DC, 4.8 mA typical
Weight 126g
Dimensions 155.0 mm (6.10") long, 21.0 mm (0.83") maximum body diameter
Output Connector Integral 3-pin XLRM-type
Accessories Included AT8405a stand clamp for 5/8"-27 threaded stands; windscreen; protective carrying case

This product has not yet been rated, be the first to write a review!