(0)
£0.00
Audio Technica AT4050ST Stereo condensor microphone stand with AT8449 shock mount
  • Audio Technica AT4050ST Stereo condensor microphone stand with AT8449 shock mount
  • Audio Technica AT4050ST Stereo condensor microphone stand with AT8449 shock mount

Audio Technica AT4050ST Stereo condensor microphone stand with AT8449 shock mount

Code:AT4050ST Condition: New
£999.17
( £1,199.00 inc. VAT)
Item in Stock  |  Usually dispatched within 24 hours
Add to Bag
This product has been added to your basket...
  • Continue Shopping
  • Checkout

AT4050ST Stereo condensor microphone stand with AT8449 shock mount

Offering the realism of a live sound field, the AT4050ST is a side-address condenser with cardioid and figure-of-eight elements configured in a Mid-Side arrangement. This innovative stereo condenser allows sound recordists the choice of selecting a left-right stereo output or choosing discrete Mid-Side signals for later manipulation, a remarkable flexibility. The microphone’s dual-diaphragm capsules maintain precise polar pattern definition across the full frequency range. Its transformerless circuitry virtually eliminates low-frequency distortion.

 

Innovative side-address Mid-Side stereo microphone engineered for professional recording, broadcast and sound reinforcement

Independent cardioid and figure-of-eight condenser elements

Switch selection of Mid-Side mode and two internally matrixed stereo modes

Dual-diaphragm capsules maintain precise polar pattern definition across the full frequency range of the microphone

Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients

The 2-micron-thick, vapor-deposited gold diaphragms undergo a five-step aging process so that the optimum characteristics remain constant over years of use

Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections

Integral 80 Hz high-pass filter switch and 10 dB pad switch

State-of-the-art design and manufacturing techniques ensure compliance with A-T’s stringent consistency and reliability standards

 

Custom shock mount provides superior isolation

Element: Externally-polarized (DC bias) condenser

Polar Pattern: Cardioid and Figure-of-eight

Frequency Response: 20-18,000 Hz

Low Frequency Roll-off: 80 Hz, 12 dB/octave

Open Circuit Sensitivity: Stereo 90°: -42 dB (7.9 mV) dB re 1V at 1 Pa

Stereo 127°: -41 dB (8.9 mV) dB re 1V at 1 Pa

Mid: -36 dB (15.8 mV) dB re 1V at 1 Pa

Side: -36 dB (15.8 mV) dB re 1V at 1 Pa

Impedance: 50 ohms

Maximum Input Sound Level: Mid and Side: 149 dB SPL, 1 kHz at 1% T.H.D.;159 dB SPL, with 10 dB pad (nominal)

Noise: Stereo 90°: 25 dB SPL

Stereo 127°: 16 dB SPL

Mid: 15 dB SPL

Side: 17 dB SPL

Dynamic Range (Typcial): Mid: 134 dB, 1 kHz at Max SPL

Side: 132 dB, 1 kHz at Max SPL

Signal-to-Noise Ratio: Stereo 90°: 69 dB, 1 kHz at 1 Pa

Stereo 127°: 78 dB, 1 kHz at 1 Pa

Mid: 79 dB, 1 kHz at 1 Pa

Side: 77 dB, 1 kHz at 1 Pa

Phantom Power Requirements: 48V DC, 6.4 mA typical (both channels total)

Switches: 90°, 127°, M-S; Flat, roll-off; 10 dB pad (nominal)

Weight: 517 g (18.2 oz)

Dimensions: 193.0 mm (7.60") long, 53.4 mm (2.10") maximum body diameter

Output Connector: Integral 5-pin XLRM-type

Cable: 5.0 m (16.5') long, 8-conductor, shielded, vinyl-jacketed stereo cable with 5-pin XLRF-type connector at microphone end and two 3-pin XLRM-type connectors at output end

Accessories Furnished: AT8449 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; microphone dust cover; protective carrying case

Audio-Technica Case Style: R1

This product has not yet been rated, be the first to write a review!