Leasing Options Available
100% Secure Online Shopping Guaranteed

Audio Technica Audio Technica AT4049B Omnidirectional condenser pencil microphone

Product Code: AT4049B
Condition: New
  • Now £405.00
  • (£486.00 inc. VAT)
  • RRP £434.17
  • |
  • Was £434.17
  • |
  • Save £29.17 (7%)
Item in Stock | Usually dispatched within 24 hours
Loading...
Price Promise Shop with us and save now!
Leasing Options Available Click here to find out more ›
100% Secure Shopping We try to beat any UK store
Free UK Delivery Order before 3pm for next day delivery

AT4049b

Omnidirectional Condenser Modular Microphone

This versatile modular microphones may be used with confidence in a wide variety of professional miking applications. Featuring direct-coupled balanced outputs for clean signals in high-output conditions, the AT4049b is totally free of the distortion associated with conventional transformer-coupled outputs. And its fast response to transients contributes to the open, transparent reproduction of even the most difficult-to- capture instruments.

The AT4049b consists of two modular subassemblies: an AT4900b-48 body and an AT4049b-EL omnidirectional head capsule (both available separately). Additional interchangeable capsules are available in cardioid (AT4051b-EL) and hypercardioid (AT4053b-EL).

  • Specially engineered to meet the most critical acoustic requirements of professional recording, broadcast and sound reinforcement
  • Omnidirectional polar pattern provides maximum ambient pickup
  • Direct-coupled, balanced output results in a clean signal even under high-output conditions
  • Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
  • Switchable 80 Hz hi-pass filter and 10 dB pad
  • Rugged turned-brass microphone housing for enduring dependability
  • State-of-the-art design and manufacturing techniques ensure compliance with Audio-Technica's stringent consistency and reliability standards

Omnidirectional Condenser Modular Microphone

 

  • Specially engineered to meet the most critical acoustic requirements
  • Omnidirectional polar pattern provides maximum ambient pickup
  • Cardioid and Hypercardioid head capsules are available separately
  • Transformerless circuitry virtually eliminates low-frequency distortion
  • Switchable 80 Hz hi-pass filter and 10 dB pad
  • Rugged turned-brass microphone housing for enduring dependability

 

ElementExternally polarized (DC bias) condenser
Polar PatternOmnidirectional
Frequency Response20 - 20.000 Hz
Open Circuit Sensitivity-34 dB (19.9 mV) re 1V at 1 Pa
Impedance50 ohms
Maximum Input Sound Level145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal)
Low Frequency Roll Off80 Hz, 18 dB/octave
SwitchesFlat, roll-off; 10 dB pad (nominal)
Dynamic Range129 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio78 dB, 1 kHz at 1 Pa
Phantom Power Requirements48V DC, 4.8 mA typical
Weight130g
Dimensions155.0 mm (6.10") long, 21.0 mm (0.83") maximum body diameter
Output ConnectorIntegral 3-pin XLRM-type
Accessories IncludedAT8405a stand clamp for 5/8"-27 threaded stands; windscreen; protective carrying case

AT4049b

 

Be the first to review Audio Technica AT4049B Omnidirectional condenser pencil microphone. Write a review
Top