Audio Technica AT4047MP Multi Pattern condenser large diaphragm microphone with AT8449SV shock mount

Product Code: AT4047MP
Condition: Used
  • Now £520.00
  • (£624.00 inc. VAT)
  • RRP £651.67
Item in Stock | Usually dispatched within 24 hours
Loading...

AT4047MP

warm vintage sound, versatile and omnidirectional

Audio-Technica’s AT4047MP delivers vintage sound in a multi-pattern design with selectable omnidirectional, cardioid, and figure-of-eight polar patterns. The microphone’s transformer-coupled output and specially tuned element provide sonic characteristics reminiscent of early F.E.T. studio microphone designs. With a wide dynamic range, incredibly low self-noise and high SPL capability, this versatile microphone excels on vocals, strings, acoustic guitar, instrument ensembles, small vocal groups and voiceovers.

  • Three switchable polar patterns: cardioid, omnidirectional, figure-of-eight
  • Engineered to meet the critical acoustic requirements of professional recording, broadcast and sound reinforcement
  • Exceptionally low self-noise, wide dynamic range and high SPL capability
  • Dual-diaphragm capsule design maintains precise polar pattern definition across the full frequency range of the microphone
  • Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity
  • Vintage silver-matte finish on microphone and shock mount
  • Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections
  • Custom shock mount provides superior isolation
  • Integral 80 Hz high-pass filter switch and 10 dB pad switch

AT4047MP

Multi-pattern Condenser Microphone

  • Three switchable polar patterns
  • Engineered to meet critical acoustic requirements
  • Exceptionally low self-noise, wide dynamic range and high SPL capability
  • Dual-diaphragm capsule design maintains precise polar pattern definition
  • Vintage silver-matte finish on microphone and shock mount
  • Custom shock mount provides superior isolation
  • Warm vintage sound ideal for vocals, brass, saxophone, bassoon instruments and amplifiers
  • Engineered to meet the critical acoustic requirements of professional recording, broadcast and sound reinforcement
  • Exceptionally low self-noise, wide dynamic range and high SPL capability
  • Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity
  • Vintage silver-matte finish on microphone and shock mount
  • Three switchable polar patterns: cardioid, omnidirectional, figure-of-eight
  • Product designed and manufactured in Japan, guaranteed 15 years
 
ElementExternally-polarized (DC bias) condenser
Polar PatternCardioid, Omnidirectional, Figure-of-eight, Multi-pattern
Frequency Response20 - 18,000 Hz
Open Circuit Sensitivity-42 dB (7.9 mV), re 1V at 1 Pa
Impedance100 ohms
Maximum Input Sound Level155 dB SPL, 1 kHz at 1% T.H.D.; 165 dB SPL, with 10 dB pad (nominal)
Noise14 dB
Low Frequency Roll Off80 Hz, 12 dB/octave
SwitchesPolar selection; Flat, roll-off;10 dB pad (nominal)
Dynamic Range141 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio80 dB, 1 kHz at 1 Pa
Phantom Power Requirements48V DC, 3.4 mA typical
Weight524g
Dimensions188.0 mm (7.40") long,53.4 mm (2.10") maximum body diameter
Output ConnectorIntegral 3-pin XLRM-type
Audio-Technica Case StyleR1
Accessories IncludedAT8449/SV shock mount for 5/8"-27 threaded stands; microphone dust cover; protective carrying case
 
  
  
  
  
  
  
  
  
  
  
  
  
  
Be the first to review Audio Technica AT4047MP Multi Pattern condenser large diaphragm microphone with AT8449SV shock mount. Write a review
Top