Offering exceptional sound quality, the AE5400 uses the same condenser element as the classic AT4050 studio microphone. This large diaphragm element ensures an accurate, natural response. With a 80 Hz HPF switch and 10 dB pad, the sound can be perfectly tailored to suit your voice. With a hardened steel body and grille and multi-stage internal windshield, the AE5400 is rugged and durable, with exceptionally low handling noise and protection against plosives and sibilance, making it a fantastic on stage microphone.
The AE5400 is presented in a hardened steel casing, with a hardened steel grille with fine steel mesh and an open-foam layer, making it rugged and durable, and able to constantly perform on stage and on tour.
The custom transform of the AE5400 improves performance by isolating against noise and RF interference, and providing excellent saturation characteristics, that lead to a smooth sound quality.
|Element||Externally polarized (DC Bias) condenser|
|Frequency Response||20 - 20,000 Hz|
|Open Circuit Sensitivity||-40 dB (10.0 mV) re 1V at 1 Pa|
|Maximum Input Sound Level||147 dB SPL, 1 kHz at 1% T.H.D.; 157 dB SPL, with 10 dB pad (nominal)|
|Low Frequency Roll Off||80 Hz, 12 dB/octave|
|Dynamic Range||133 dB, 1 kHz at Max SPL|
|Signal-to-Noise Ratio||80 dB, 1 kHz at 1 Pa|
|Phantom Power Requirements||11-52V DC, 4 mA typical|
|Dimensions||7.05" (179.0 mm) long, 1.97" (50.0 mm) head diameter, 1.30" to 0.87" (33.0 mm to 22.0 mm) tapered body diameter|
|Output Connector||Integral 3-pin XLRM-type|
|Accessories Included||AT8470 Quiet-Flex® stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch|