With its large-diaphragm element, the AE5100 guarantees uncompromised quality for all sound recording of acoustic instruments (especially violins and guitars), overheads, percussion, acoustic and choirs.
Its large diaphragm condenser element combined with an "open" microphone head structure provides high accuracy and exceptional clarity in sound.
Robust metal construction ensures long lasting performance and consistent reliability on tour
The integrated low-cut filter allows you to switch easily between flat frequency response and bass rolloff. Its 10dB attenuator reduces the sensitivity of the microphone, whilst increasing the sound pressure level, thus increasing the versatility of the AE5100.
|Element||Fixed-charge back plate, permanently polarized condenser|
|Frequency Response||20 - 20,000 Hz|
|Open Circuit Sensitivity||-36 dB (15.8 mV) re 1V at 1 Pa|
|Maximum Input Sound Level||148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL with 10 dB pad (nominal)|
|Low Frequency Roll Off||80 Hz, 12 dB/octave|
|Dynamic Range||137 dB, 1 kHz at Max SPL|
|Signal-to-Noise Ratio||83 dB, 1 kHz at 1 Pa|
|Phantom Power Requirements||11-52V DC, 3.2 mA typical|
|Dimensions||5.85" (148.5 mm) long, 1.02" (26.0 mm) maximum diameter|
|Output Connector||Integral 3-pin XLRM-type|
|Accessories Included||AT8471 isolation clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; AT8136 windscreen; soft protective pouch|