With pristine audio quality, ultra-low handling noise, and high-frequency clarity, Audio-Technica's AE3300 gives voice to the subtleties of vocal performance. This cardioid condenser vocal microphone features the condenser element used in the legendary AT4033 and proven in the world's finest recording studios. The hardened-steel outer grille is lined with fine steel mesh and a layer of open-cell foam for ultimate protection against vocal plosives without compromising high-frequency clarity. Its superior anti-shock engineering ensures low handling noise and quiet performance. For exceptional performance. For exacting detail. For brilliant clarity: AE3300. it's the new standard in live audio.
The AE3300 is built with the element of the legendary AT4033 studio microphone. As such, it delivers the same clarity and realism without coloration. Moreover, its very well balanced cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source and& ensuring a high quality rejection.
The grille of the AE3300 is composed of 3 structures: a polyurethane foam layer which guarantees perfect thermal insulation, a hardened steel outer grille, covered with a fine metal mesh.
Whether you're recording in the studio with your AT4033aSM or performing on stage with the AE3300 or the wireless T3300a AEW-wire system version connected to a 4000 or 5000 Series, you will always find the same sound homogeneity, whatever the situation.
|Element||Fixed-charge back plate, permanently polarized condenser|
|Frequency Response||30 - 18,000 Hz|
|Open Circuit Sensitivity||-42 dB (7.9 mV) re 1V at 1 P|
|Maximum Input Sound Level||147 dB SPL, 1 kHz at 1% T.H.D.; 157 dB SPL, with 10 dB pad (nominal)|
|Low Frequency Roll Off||80 Hz, 12 dB/octave|
|Dynamic Range||128 dB, 1 kHz at Max SPL|
|Signal-to-Noise Ratio||75 dB, 1 kHz at 1 Pa|
|Phantom Power Requirements||11-52V DC, 3 mA typical|
|Dimensions||7.05" (179.0 mm) long, 1.97" (50.0 mm) head diameter, 1.30" to 0.87" (33.0 mm to 22.0 mm) tapered body diameter|
|Output Connector||Integral 3-pin XLRM-type|
|Accessories Included||AT8470 Quiet-Flex® stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch|