(0)
£0.00
Atomos Connect-AC H2S HDMI to 3G/HD-SDI converter with Test Pattern Generator
  • Atomos Connect-AC H2S HDMI to 3G/HD-SDI converter with Test Pattern Generator
  • Atomos Connect-AC H2S HDMI to 3G/HD-SDI converter with Test Pattern Generator
  • Atomos Connect-AC H2S HDMI to 3G/HD-SDI converter with Test Pattern Generator
  • Atomos Connect-AC H2S HDMI to 3G/HD-SDI converter with Test Pattern Generator

Atomos Connect-AC H2S HDMI to 3G/HD-SDI converter with Test Pattern Generator

Code:AO-ATOMACH001 Condition: New
£175.00
( £210.00 inc. VAT)
Item in Stock  |  Usually dispatched within 24 hours
Add to Bag
This product has been added to your basket...
  • Continue Shopping
  • Checkout

Connect-AC H2S

Connect-AC H2S is an AC-powered HDMI to HD-SDI converter and engineering tool. Unlike other converters, Connect-AC H2S is powered by a standard figure-of-8 mains cable, making them convenient and reliable. Users no longer need to put up with unsightly, cumbersome and potentially unsafe external power supply unit.

More than just a converter.

Just like the more portable Connect H2S converter, the Connect-AC counterpart offer much more than just format conversion. A test pattern generator and audio test tone is built in support a wide-variety of industry formats. Atomos have also retained the flashlight feature from the Connect models, and include 2:2 pulldown removal too.

Connect-AC does not have a power on/off switch and is 'always on' when power is connected to the AC input. Should power be disconnected or the source fail, when power is restored the Connect-AC will instantly power back on and operate exactly as it was set when last active.
An optional 1U rack-mount kit is available that can accommodate up to four Connect-AC converters per kit.

 

Quick Facts:

  • AC mains input, 100-240VAC, 0.2A 50-60Hz; simply connect a figure-of-8 mains cable. No external DC power adapters, wall-warts required!
  • HDMI to 3G/HD/SD-SDI signal converter with dual SDI output.
  • Built-in Test Pattern Generator including 2kHz Audio Test Tone covering a multitude of industry standards.
  • Supports 2:2 Pulldown Removal.
  • Flashlight functionality through front LEDs.
  • Time-code and record trigger pass-through.
  • 'Always on' operation means if power is supplied the Connect-AC is on, and if power is disrupted and restored the device will automatically power up and continue in the previously selected state. 
  • Signal re-clocking and equalisation enables use as an SDI extender, or HDMI extender when used in combination with an S2H Connect or Connect-AC unit.
  • Optional 1U rack-mount kit can hold up to four (4) Connect-AC H2S or S2H converters.

This product has not yet been rated, be the first to write a review!