The Hi5-3D is a 3D video multiplexer that combines two HD-SDI Inputs into various multiplexed 3D formats for output on HDMI 1.4a and HD-SDI. The HDMI 1.4a output supports EDID transactions that allow automatic 2D/3D configuration per the HDMI monitor's capabilities. Input SDI 2 will be frame synchronized to input SDI 1 in 3D Modes. Embedded SDI input audio is embedded in both the HDMI and SDI outputs. 2 channel RCA audio output is also supported with user control of channel selection. The Hi5-3D supports AJA's Mini-Config application for user configuration and firmware download.
Hi5-3D works with both 2D and 3D inputs. When in the 2D mode, the input is simply passed to the output unmodified. In the 3D mode, the Hi5-3D supports the minimum required 3D modes as defined by the CEA for HDMI 1.4a televisions.
The Hi5-3D supports both dipswitch control and host control via the Mini-Config application. One of the dipswitches is a \'Local/Remote\' switch. When in the \'Local\' mode, the remaining dipswitches support a subset of the user controls. When in the \'Remote\' mode, AJA\'s Mini-Config application controls the unit (or control as last set).
Dual HD-SDI (auto-selected),
1 SDI for left eye input (10-bit)
1 SDI for right eye input (10-bit)
10-bit HDMI v1.4a
1 HD-SDI output, 10-bit
HDMI embedded audio, 2 or 8 channels
2 RCA-style analog outputs at -10dBV (nominal), User assignable channels
5.8\" x 3.1\" x 1 (147mm x 79mm x 25mm)
NOTE: The Hi5-3D does not encode the HDMI output with HDCP encryption. By definition, SDI inputs to the Hi5-3D are unencrypted.