Aja D10CEA Universal SDI to Analogue Converter with embedded audio

Aja D10CEA Universal SDI to Analogue Converter with embedded audio

Code:D10CEA Condition: New
Now £510.00
Was: £580.00 You Save: £70.00 (12%)
( £612.00 inc. VAT)
Item in Stock  |  Usually dispatched within 24 hours
Add to Bag
This product has been added to your basket...
  • Continue Shopping
  • Checkout

SDI to Analog Audio/Video

The D10CEA converts SDI video with embedded audio to component or composite analog video and 4 Channel balanced analog audio. The video outputs can be configured as YPbPr (Betacam or SMPTE/EBU-N10) & RGB & composite or YC (S-Video). The analog audio outputs can be wired in a balanced or unbalanced configuration. The 4 audio channels can be selected from group 1-4. Audio and video output connections are available on a 25 pin "D" subminiature connector (breakout cable supplied). All video/audio configuration is done by external dipswitch selection. This versatile & low-cost & miniature monitoring solution also outputs two re-clocked loop-thru SDI outputs.

Digital to Analog Audio and Video Converter

SDI with Embedded Audio Input

Component or Composite Video Outputs

4 Channel Balanced Audio Output

2 Re-Clocked, Loop-Thru SDI Outputs

Selectable Audio Channel Pair/Group


SDI (SMPTE 259M) w/Embedded Audio, 1x BNC


Video: YPbPr - SMPTE, EBU-N10, Betacam, RGB, NTSC, PAL, YC (S-Video)
Audio: 4 Channel Balanced/Unbalanced
Video/Audio Outputs on 25 Pin D Connector
2 SDI Re-Clocked Loop-Thru, 2x BNC

Frequency Response

Video, +/- .25dB to 5Mhz, Audio, +/- .5dB to 20Khz

User Controls

External Dipswitch
Video Format
H/V Blanking
Audio Group 1 - 4
Audio Level (adjustable via switch selection):

    * S/N A15212 and above: +24, +18, +15, +12 dBu
    * S/N below A15212: -14, 0, +2, +4 dBu


5VDC Regulated, 4 Watts, Power Supply Required (sold separately)


5.8\" x 3.1\" x 1\" (147 x 79 x 25mm)

This product has not yet been rated, be the first to write a review!